Medium and Heavy Trucks

Have truck repair questions? Ask an Expert

Connect one-on-one with {0} who will answer your question

Related Medium and Heavy Trucks Questions
I have a 95 international 4700. I have air in the fuel line.
Hi, I have a 95 international 4700. I have air in the fuel line. At first I used pump primer and bleed crew next to it. It works for a while but the air continue to built up quicker. Last nite when I … read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
203 satisfied customers
DT 530 E. Shows no fuel pressure at the fuel pressure
DT 530 E. Shows no fuel pressure at the fuel pressure housing but runs for a short period after priming pump. Cracked return line to fuel filter housing and pumped over 100 times. Fuel but no air. Can… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
203 satisfied customers
REPLACED MAXXFORCE TERRASTART 6.4 ENGINE. COMPUTER SHOWS IT
REPLACED MAXXFORCE TERRASTART 6.4 ENGINE. COMPUTER SHOWS IT IS ASKING FOR FULL FUEL PRESSURE, BUT IT IS NOT GETTING PRESSURE. HOW CAN I BLEED THE LINES? … read more
Steven
Steven
Triage Tech/Shop Foreman
Associates
184 satisfied customers
I have a 2010 DT530 crank but won't start. Also there is no
I have a 2010 DT530 crank but won't start. Also there is no smoke while cranking. I don't have any codes other than the one for the AC. Check engine light comes on and goes out once it finish cycling … read more
Steven
Steven
Triage Tech/Shop Foreman
Associates
184 satisfied customers
I need the complete overhaul procedure with torque
I need the complete overhaul procedure with torque specifications, schematics, etc -- for my (2007 International MA035, *DuraStar 4400, with Maxxforce DT466DT)… read more
Steven
Steven
Triage Tech/Shop Foreman
Associates
184 satisfied customers
I have a 2013 International maxxforce dt and soot level will
I have a 2013 International maxxforce dt and soot level will not go down during a regen and exhaust temp will not get over 400 deg.… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
203 satisfied customers
MaxxForce DT keeps losing its prime. Injectors were replace
MaxxForce DT keeps losing its prime. Injectors were replace about 6 months ago, replaced fuel pump and housing. Still hard starting, idles rough for quite a while until all of the air is bled through.… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
203 satisfied customers
I just changed my fuel filter WIX with water separator screw
I just changed my fuel filter WIX with water separator screw on bowl I turned the key to allow the pump to prime and the glow plug sign to go out waited then repeated the process this time tried to st… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
8,961 satisfied customers
I am working on an International box truck with a Maxxforce
Hi Andy,I am working on an International box truck with a Maxxforce DT. The VIN is CL536178. It has a 2335 code and will not start. Using Service Maxx while cranking the engine, the high pressure oil … read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
203 satisfied customers
04 International HT530 motor wont fire, Cant prime it, Have
04 International HT530 motor wont fire, Cant prime it, Have done the bleeder valve and got nice stream a fuel. Almost wants to fire, If I leave it overnight the fuel filter empties a bit like it sipho… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
203 satisfied customers
How are you I have a 2011 international maxxforce 13 and I
Hi how are you I have a 2011 international maxxforce 13 and I don't have fuel pressure enough at the low side line … read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
203 satisfied customers
I have a 2013 Pete with an mx 13 showing low fuel supply
I have a 2013 Pete with an mx 13 showing low fuel supply pressure code 0087 and rail pressure code 228d , the rail pressure code should be secondary to the supply code. What should the supply pressure… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
8,961 satisfied customers
I am working on a dd15 that was running rough. Customer
I am working on a dd15 that was running rough. Customer changed fuel filters and now it won't start. Fuel rail pressure is 5 psi. I'm not real familiar with the fuel systems on this engine so don't kn… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
8,961 satisfied customers
I have a 2010 International with a MaxxForce engine. the
I have a 2010 International with a MaxxForce engine. the engine runs great but sometimes when it gets hot, it loose power. when this happen two codes come active : 2284, SPN 174- fuel temp above maxim… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
8,961 satisfied customers
i have a 2013 international with a dt engine. showing that
i have a 2013 international with a dt engine. showing that regen is required (highest level 3/3). the soot load shows 218% but the dpf differential pressure shows to only be .01psi. from my understand… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
8,961 satisfied customers
I have a 2010 international with a max force engine the
Hi I have a 2010 international with a max force engine the dash codes are spn 611 fmi 14 sa 11 and spn 791 fmi 14 sa 11 can You help with these codes and do know where a guy can find a code sheet Than… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
8,961 satisfied customers
I have an 98 freightliner step van. It ran fine all day. Parked
I have an 98 freightliner step van. It ran fine all day. Parked it and then started it up. It started fine,then it acted like it ran out of fuel. The fuel gauge showed 1/2 take but I added 5 gallons t… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
203 satisfied customers
I ran my 95 kw w900 with 3406e cat low on fuel - my question
I ran my 95 kw w900 with 3406e cat low on fuel - my question is can I just pump pressure with the hand primer pump or are there air bleeds that need to be cracked. I loosened the one that is labeled a… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
4,965 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Daniel Wilson

Daniel Wilson

8,961 satisfied customers

Owner at DJ Wilson

Cat Man

Cat Man

Cat Engine Expert

4,965 satisfied customers

I am ASE Master Truck Certified.

Wayne

Wayne

Journeyman

3,400 satisfied customers

worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Jeremy

Jeremy

Certified Truck/Bus Technician

2,672 satisfied customers

ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, Network Engineer specializing in CAN faults, Aftertertreatment, and vehicle communications

cumminsdr

cumminsdr

Mechanic

1,458 satisfied customers

All types of Cummins applications

Chris (aka-Moose)

Chris (aka-Moose)

Technician

149 satisfied customers

16 years of experience

dieseldan55

dieseldan55

Contractor

77 satisfied customers

Road Service mechanic for Volvo Construction.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x