Medium and Heavy Trucks

Have truck repair questions? Ask an Expert

Connect one-on-one with {0} who will answer your question

This answer was rated:

I have a N14 in a Kenworth T600 at 210 I have a high water…

I have a N14...

I have a N14 in a Kenworth T600 at 210 I have a high water and low oil alarm come on and no fan, I turn the fan on manually, worked fine before overhaul last year

Mechanic's Assistant: What's the make/model/year of your truck? Engine type?

Kenworth T600 1993

Mechanic's Assistant: Anything else you want the truck mechanic to know before I connect you?

Replaced sensors nothing changes

Show More
Show Less
Ask Your Own Medium and Heavy Trucks Question
Answered in 2 days by:
6/9/2018
Technician: Jackie Dempsey, Heavy Line Technician replied 4 years ago
Jackie Dempsey
Jackie Dempsey, Heavy Line Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 59
Experience: Diesel Technician at Cummins Pacific
Verified

Hello! Thank you for choosing Just Answer, my name is ***** ***** I will be happy to assist you. Can you please provide me with the 8 digit (numbers only) engine serial number? This number is ***** on the engines data plate, which is located on the front gear housing or valve cover of the motor.

Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 4 years ago
11749395
Technician: Jackie Dempsey, Heavy Line Technician replied 4 years ago

Thank you! Please give me a moment to look into that serial number.

One more question, do you know the numbers of the fault codes that are currently active? If not it is not a problem I was just curious

Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 4 years ago
There are no fault codes, put new sensor for fan in today still doesn't come on, and still shows high water and low oil at 210°-212°
Technician: Jackie Dempsey, Heavy Line Technician replied 4 years ago

So there is no stop engine or check engine light present? I see you mentioned it was overhauled, has this been an issue since the overhaul or it just began happening?

Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 4 years ago
No stop engine or check engine, overhauled February, noticed fan not turning on around August or September
Technician: Jackie Dempsey, Heavy Line Technician replied 4 years ago

I have attached a few documents I believe may be of assistance, please take a look at them and let me know. I feel it may be a parameter issue within the ECM. Do you have Cummins Insite?

Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 4 years ago
This will give me something I can check, I know a lot about my N14 but when it comes to electrical I am weak, thank you
Technician: Jackie Dempsey, Heavy Line Technician replied 4 years ago

I am right there with you, electrical is difficult, but once you get to know the wiring schematic it gets easier. Go to www.qsol2.cummins.com (if that link doesnt work just copy/paste into your browser) you can create a free customer account and access information for up to 5 engine serial numbers. Within this system you can pull up parts information, service manuals and wiring schematics. If you need any help navigating it I am always here! I hope I have been able to properly assist you. Please provide a rating that displays your satisfaction with my answer this evening. Of course if you have any further questions I am happy to help.

Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 4 years ago
Thank you, ***** ***** been an insite
Technician: Jackie Dempsey, Heavy Line Technician replied 4 years ago

I am glad to hear it! Take care and please contact me again if I can be of assistance. Have a wonderful weekend!

Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 4 years ago
You too!!! Thanks
Technician: Jackie Dempsey, Heavy Line Technician replied 4 years ago

Good evening! I hope all is well! I just wanted to send a quick reminder to please submit a rating based on the service you have received. As experts on the site we are not compensated for the information provided without our clients approval rating. I appreciate your time, once more hope you have a good weekend!

Jackie Dempsey
Jackie Dempsey, Heavy Line Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 59
Experience: Diesel Technician at Cummins Pacific
Verified
Jackie Dempsey and 87 other Medium and Heavy Trucks Specialists are ready to help you
Ask your own question now
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a technicianLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Jackie Dempsey Your Own Question
Jackie Dempsey
Jackie Dempsey
Jackie Dempsey, Heavy Line Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 59
59 Satisfied Customers
Experience: Diesel Technician at Cummins Pacific

Jackie Dempsey is online now

Related Medium and Heavy Trucks Questions
Check fluids light flashing and engine shut off, 7 thousand
Check fluids light flashing and engine shut off JA: How long has the maintenance light been on? When did you last change the oil? Customer: 7 thousand mile ago JA: What's the make, model, and year of … read more
Nich1019
Nich1019
Diesel Technician
Vocational, Technical or Trade School
64 satisfied customers
I have Cummins n14. Volvo vnl 2000. 950000. Le hice el head
I have Cummins n14 JA: What's the make, model, and year of your car? Customer: volvo vnl 2000 JA: What's the approximate mileage on your 2000 Cummins? Customer: 950000 JA: Is there anything else the V… read more
cumminsdr
cumminsdr
Mechanic
High School or GED
1,886 satisfied customers
Check fluids light comes oh while driving flashes and stays
check fluids light comes oh while driving flashes and stays on for a while then will go off. and while it is idling when i first get in it of a morning after the air pressure builds up it will run for… read more
Expert
Expert
10,510 satisfied customers
I have N14 Cummins Celect plus, low oil pressure warning &
I have N14 Cummins Celect plus, low oil pressure warning & Check engine light 5minutes idling and shut off … read more
cumminsdr
cumminsdr
Mechanic
High School or GED
1,886 satisfied customers
The engine fan will not come on automatically when water
The engine fan will not come on automatically when water temp gets high under a load. The fan works when I turn on manual switch and the fan works with the high pressure side of A/C. this is a C-16 en… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
5,353 satisfied customers
1999 KW T600- Engine Fan Won't turn ON - Can't Find the Fan
1999 KW T600- Engine Fan Won't turn ON - Can't Find the Fan relay- where is it located ?? … read more
Keiphun Sowell
Keiphun Sowell
Owner Brothers Restoration/Troubleshoot
AutoDiesel Technology
2,759 satisfied customers
Steve, I have a Kenworth T600 and as I turn the a/c on it
Hello Steve, I have a Kenworth T600 and as I turn the a/c on it works fine but there are days I try to turn it on and the fan won't come on and later on it will magically come on. I guess I have a fau… read more
Wayne
Wayne
Journeyman
Vocational, Technical or Trade Scho
5,115 satisfied customers
I drive a 2001 Kenworth t600 n14 Eaton 10 speed when I drive
I drive a 2001 Kenworth t600 n14 Eaton 10 speed when I drive loaded or un loaded on my high gears 7-10 don't have power I replaced two fuel filters and a fuel line and nothing change … read more
Wayne
Wayne
Journeyman
Vocational, Technical or Trade Scho
5,115 satisfied customers
I have problem with my 3406e cat its over heating I have
I have problem with my 3406e cat its over heating I have changed water pump, oil cooler ,themostat,coolant temperature sensor … read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
5,353 satisfied customers
I have 1996 t600.cummins n14 celect.wiring harness from
i have 1996 t600.cummins n14 celect.wiring harness from truck to engine has one wires to ac-oil temp-low oil pressure-has one other single plug and one other 4 prong plug.not sure what single and 4 pr… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,062 satisfied customers
Tacometer intermittent, idle switch will not toggle engine
tacometer intermittent, idle switch will not toggle engine speed up 1994 t600 kenworth n14 … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,062 satisfied customers
I have a kenworth t600 the low air alarm works normally with
I have a kenworth t600 the low air alarm works normally with the truck running but with the truck off and key on it will not work… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,062 satisfied customers
I have a 99 – 04 Nissan UD 1200 / 1400 which had an engine
I have a 99 – 04 Nissan UD 1200 / 1400 which had an engine failure, conrod through the block. When this happened the oil pressure light came on and a high pitched alarm started sounding with a red sym… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,062 satisfied customers
Have a 2007 Kenworth T600. Having A/C problems in sleeper.
Have a 2007 Kenworth T600. Having A/C problems in sleeper. System is good with ok freon compressor cold A/C lines. Seems to be an electrical issue with drive motor for the heater core leaving valve op… read more
Jeremy
Jeremy
Certified Truck/Bus Technician
Associate Degree
2,756 satisfied customers
I am working ona1997 W900 Kenworth with a N-14 celect plus
I am working ona1997 W900 Kenworth with a N-14 celect plus engine. The engine fan will work with with manual switch but will not come on automaticly with a/c or temp. I need a schematic of the manual … read more
spankyjr1
spankyjr1
Retired
Vocational, Technical or Trade Scho
420 satisfied customers
i have a red top n14 plus celect in a 2000 kenworth t600 the
i have a red top n14 plus celect in a 2000 kenworth t600 the check engine o and fan lite on the panel are on. the mechanic replaced a valve but still have a problem and he saying it is wiring. the cod… read more
cumminsdr
cumminsdr
Mechanic
High School or GED
1,886 satisfied customers
99 KW T600 N14 celet Plus engine fan always on checked air
99 KW T600 N14 celet Plus engine fan always on checked air valve ok, but the connector has power all the time, disconected manual switch and a/c sensors. Put a new temp. Sensor and still wire power up… read more
spankyjr1
spankyjr1
Retired
Vocational, Technical or Trade Scho
420 satisfied customers
i have a m11 celect plus engine on a 99 kenworth t600 i want
i have a m11 celect plus engine on a 99 kenworth t600 i want to swap it to a n14 celect off a 98 kenworth is the wiring compatible for the swap… read more
cumminsdr
cumminsdr
Mechanic
High School or GED
1,886 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Daniel Wilson

Daniel Wilson

6,062 satisfied customers

Owner at DJ Wilson

Cat Man

Cat Man

Cat Engine Expert

5,353 satisfied customers

I am ASE Master Truck Certified.

Wayne

Wayne

Journeyman

5,115 satisfied customers

worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Jeremy

Jeremy

Certified Truck/Bus Technician

2,756 satisfied customers

ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, Network Engineer specializing in CAN faults, Aftertertreatment, and vehicle communications

Curtis B.

Curtis B.

Technician

1,947 satisfied customers

Technician turned service manager on multiple lines of trucks and engines, used in industry.

cumminsdr

cumminsdr

Mechanic

1,886 satisfied customers

All types of Cummins applications

Chris (aka-Moose)

Chris (aka-Moose)

Technician

641 satisfied customers

24 years of experience diagnosing & repairing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x