How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 11718
Experience:  worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling
6825259
Type Your Medium and Heavy Trucks Question Here...
Wayne is online now
A new question is answered every 9 seconds

2007 I H 8600 7J368831 Brake light switch location

Customer Question

2007 I H 8600 7J368831 Brake light switch location.
Submitted: 7 months ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 7 months ago.

Hi, I’m Wayne.

I will be assisting you with this issue today.

the brake light switch should be on the brake valve on the engine side of the firewall. It looks kinda like an oil pressure switch, just threaded into the brake valve block

I hope this helps you

Wayne

My goal is to give you the best experience possible.

I hope that I have earned a 5-star rating

Found at the top of the screen before you leave today.

If you need more assistance, please use the reply box and let me know.​

Customer: replied 7 months ago.
Not there. Ive been through half the dash and found 3 other switches but not the one i want
Expert:  Wayne replied 7 months ago.

Hi Arthur

Let me look again

Wayne

Expert:  Wayne replied 7 months ago.

Hi

here is the bodybuilder diagram

look at the middle left they show 2 of them

Wayne

Customer: replied 7 months ago.
Ok, do you know where they are located on the vehicle?
Expert:  Wayne replied 7 months ago.

Hi

Sorry the ones I knew is where I told you

on firewall

you just need to follow wires and parts showing close to the ECM

Wayne

Customer: replied 7 months ago.
Wayne,
I was hoping you answer would get me further along on this problem. I got tired of tracing lines so I asked for help.
Expert:  Wayne replied 7 months ago.

Morning Arthur

Yes I am sorry I do not have more info for you

I am going to send this to 2 other experts, my buddies see if they have more input

Wayne

Customer: replied 7 months ago.
Thanks Wayne
Expert:  Wayne replied 7 months ago.

Welcome

Wayne

Customer: replied 7 months ago.
The pneumatic schematic may give a clue
Expert:  Wayne replied 7 months ago.

OK

I will let them know

Wayne

Customer: replied 7 months ago.
Found it !
Expert:  Wayne replied 7 months ago.

Hi

Great job

Where was it ??

now just replace it

Wayne