Medium and Heavy Trucks

Have truck repair questions? Ask an Expert

Ask an Expert,
Get an Answer ASAP!

This answer was rated:

I've got a 2006 International 4400 with a no crank problem.

I've got a 2006 International...
I've got a 2006 International 4400 with a no crank problem. Here's what I've found.
I have no ground from ecm to pin 85 on starter relay, no ecm communication. I have good battery power to ec m relay and egr/turbo relay.
Not sure if I'm getting grounds and power to the ec m, but I'm not sure which connector to remove and check. Also, the ec m is the module bolted farthest from the engine block, correct?
Show More
Show Less
Ask Your Own Medium and Heavy Trucks Question
Answered in 17 minutes by:
3/16/2018
Daniel Wilson
Category: Medium and Heavy Trucks
Satisfied Customers: 6,884
Experience: Owner at DJ Wilson
Verified
Hi my name is***** will be glad to help. Professionals are not employees of the site but we can follow up as needed on here. If all your fuses and relays are good then you will want to check between the battery box and ECM for an inline fuse for ECM power. Also there is an IDM relay that you will want to check for power and proper operation. Please let me know the engine model information and transmission model information as I have some diagrams for this model that I can likely help with.
Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 5 months ago
Thanks Dan. I have checked the battery box fuses. I have power and ground all the way into the engine harness. It is a dt466 engine, manual trans.

Click this link for the specs and pinouts for the engine. I can help with the full chassis ones as well if needed.

Service info

Ask Your Own Medium and Heavy Trucks Question

If interested in the full chassis there needs to be another post/reply from you on here before I can send the offer. If

Ask Your Own Medium and Heavy Trucks Question

Please remember to take a moment to rate as that is how the site credits my time helping on the site or let me know if you need more help. 5 star and bonuses are always greatly appreciated.

Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 5 months ago
Thanks Dan, I will probably need the chassis one. I've narrowed it down to no ignition power to the ecm.

The Chassis ones are in a large PDF but cover the full vehicle. Ill send over the offer.

Daniel Wilson
Category: Medium and Heavy Trucks
Satisfied Customers: 6,884
Experience: Owner at DJ Wilson
Verified
Daniel Wilson and 87 other Medium and Heavy Trucks Specialists are ready to help you
Ask your own question now
Customer reply replied 4 months ago
Did you get my contact info Dan?

Hi Eric. I was not logged in when you accepted the offer. Ill get those uploaded and over to you shortly.

Ask Your Own Medium and Heavy Trucks Question

I posted the link in the private contact window above. Let me know when you have everything so i know when its safe to shut the link down.

Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 4 months ago
Got it. Thanks Dan.
Okay great. Pleasure to help
Ask Your Own Medium and Heavy Trucks Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a technicianLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson
Daniel Wilson
Category: Medium and Heavy Trucks
Satisfied Customers: 6,884
6,884 Satisfied Customers
Experience: Owner at DJ Wilson

Daniel Wilson is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Daniel Wilson

Daniel Wilson

6,884 satisfied customers

Owner at DJ Wilson

Cat Man

Cat Man

Cat Engine Expert

4,530 satisfied customers

I am ASE Master Truck Certified.

Wayne

Wayne

Journeyman

2,892 satisfied customers

worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Jeremy

Jeremy

Certified Truck/Bus Technician

2,243 satisfied customers

ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, EPA 608/609 HVAC Certified, Steering/Suspension and ABS/Brakes Technician

cumminsdr

cumminsdr

Mechanic

1,351 satisfied customers

All types of Cummins applications

Curtis B.

Curtis B.

Technician

991 satisfied customers

Technician turned service manager on multiple lines of trucks and engines, used in industry.

dieseldan55

dieseldan55

Contractor

74 satisfied customers

Road Service mechanic for Volvo Construction.

< Previous | Next >

Related Medium and Heavy Trucks Questions
I have 1999 4700 dt466 that will not crank or start when I
I have 1999 4700 dt466 that will not crank or start when I jump stater solenoid I tried plugging scanner into but no ecm connection. I just installed 6 injectors and now it won't crank … read more
Andy3221
Andy3221
truck /coach technician
Vocational, Technical or Trade Scho
222 satisfied customers
2009 INTERNATIONAL 4400 ( LAST 8 OF VIN - 9H062153 ) PUT
2009 INTERNATIONAL 4400 ( LAST 8 OF VIN - 9H062153 ) PUT LONG BLOCK IN TRUCK. SCANNED TRUCK BEFORE WE STARTED. GOT THIS CODE FOR VGT DTC 2549 SPN 8321 FMI 12. LOOKING FOR WIRRING DIAGRAM FOR VGT. I HA… read more
Andy3221
Andy3221
truck /coach technician
Vocational, Technical or Trade Scho
222 satisfied customers
I have an international 4300 no crack, starter checked good,
i have an international 4300 no crack, starter checked good, relay is getting power looks like a ground issue. i jumped ground to the realy and the truck starts fine but now cruise control is not work… read more
Alex Olsen
Alex Olsen
auto/diesel/industrial
488 satisfied customers
2005 ic bus will not crank over. International IC bus 2005
Yes, tested all ecm, idm, tcm,ect.. fuses. I can jump the starter relay and starter works great. There are no codes (scanned with prolink). … read more
Alex Olsen
Alex Olsen
auto/diesel/industrial
488 satisfied customers
No crank, no start. ECM power relay clicks steadily when
No crank, no start. ECM power relay clicks steadily when ignition is off, or thee ignition switch is removed (to rule out ignition switch problem). It is a 1999 International 4700 with DT466e. … read more
Andy3221
Andy3221
truck /coach technician
Vocational, Technical or Trade Scho
222 satisfied customers
No start, starter will not ingage, 2006 international 4300
we have already jump the starter and it will engage… read more
Alex Olsen
Alex Olsen
auto/diesel/industrial
488 satisfied customers
2005 Isuzu NPR 5.2l diesel No communication to ECM. All
2005 Isuzu NPR 5.2l diesel No communication to ECM. All Powers OK, grounds OK, Found break in communication line between DLC and ECM, Still found no Comm. We have a TECH II with the ISUZU card. We can… read more
Jeremy
Jeremy
Certified Truck/Bus Technician
Associate Degree
2,243 satisfied customers
I have a 2002 international 4700 i am looking for a ecm
i have a 2002 international 4700 i am looking for a ecm wiring diagram for i have a no crank no start condition… read more
Alex Olsen
Alex Olsen
auto/diesel/industrial
488 satisfied customers
I have a 2005 International DT466 VIN 6H257238 that has code
I have a 2005 International DT466 VIN 6H257238 that has code 368 for EGR Driver Module/ECM communication fault … read more
Alex Olsen
Alex Olsen
auto/diesel/industrial
488 satisfied customers
I have a 2007 international 4400 with dt466 auto. The truck
I have a 2007 international 4400 with dt466 auto. The truck will not crank unless manually grounding pin 85 on starter relay. When manually grounded the truck cranks. While cranking i do not show rpms… read more
Jeremy
Jeremy
Certified Truck/Bus Technician
Associate Degree
2,243 satisfied customers
I have a 1999 international 8100 the dash cluster is not
i have a 1999 international 8100 the dash cluster is not working there is no communication with a scan tool and the dash cluster is not working it sweeps but shows no info i hope its a ground or wirin… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,884 satisfied customers
I need help on a 2008 international durastar 4400 with a dt
I need help on a 2008 international durastar 4400 with a dt 466e dpf truck with a no throttle just idle only and has codes 8321 fmi 12 and 8146 fmi 7 codes on the cluster… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,884 satisfied customers
2005 international 4400 dt466 no crank no start ground 85 stater
2005 international 4400 dt466 no crank no start ground 85 stater relay pin and turns over?… read more
Andy3221
Andy3221
truck /coach technician
Vocational, Technical or Trade Scho
222 satisfied customers
I have an International truck, 2005 4300 with I6 diesel engine.
I have an International truck, 2005 4300 with I6 diesel engine. It won't crank over, you can hear a relay in the cab engage but it won't crank. I jumped the relay in the power distribution box on the … read more
Andy3221
Andy3221
truck /coach technician
Vocational, Technical or Trade Scho
222 satisfied customers
Good morning buddy,I have been having trouble with my 2005
Good morning buddy, I have been having trouble with my 2005 century. It has been reporting codes : Eng Aux in/out #1 Calib 128 155 13 Eng controller No response 128s254 07 Eng Erratic 128s147 02 Took … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,884 satisfied customers
06 international isx, cranks wont start, gauges cycle then
06 international isx, cranks wont start, gauges cycle then they max out like it is shorted out some where, fuses good, power to ecm, not to lift pump… read more
Travis A. Wells
Travis A. Wells
Truck Mechanic
Associates of Applied Science
4 satisfied customers
I Have a 2005 international 4300. Active code of 368 FMI 7,
I Have a 2005 international 4300. Active code of 368 FMI 7, EGR driver mod./ECM2 comm. fault. The engine starts and runs, no power. What is the diag. procedure for this? Where is the EGR module locate… read more
Andy3221
Andy3221
truck /coach technician
Vocational, Technical or Trade Scho
222 satisfied customers
I have a 2005 international 4400 with a DT466. Its a no start
I have a 2005 international 4400 with a DT466. Its a no start no crank. Batteries are new. I turn the key on the dash lights up, go to crank the ign. realy clicks and that's it. Test for power at the … read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
4,530 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x