Medium and Heavy Trucks

Have truck repair questions? Ask an Expert

Connect one-on-one with {0} who will answer your question

Related Medium and Heavy Trucks Questions
I have a 2004 international 4300 with the dt466e, it idles
i have a 2004 international 4300 with the dt466e, it idles good, but once any attempt is made raise the rpms, it surges and lopes with lots of black, grey smoke. we have replaced all 6 injectors, run … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
431 satisfied customers
2005, DT466E, low to high side open, injectors 1 through 6.
2005, DT466E, low to high side open, injectors 1 through 6 … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
431 satisfied customers
2006 international no start replaced top orings injector
2006 international no start replaced top orings injector orings highpressure pump and fuel pump hear injector also idm replace… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,886 satisfied customers
2005 international 4300 dt466e has loss of power and 4 fault
2005 international 4300 dt466e has loss of power and 4 fault codes: … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
431 satisfied customers
07 international 4300 dt466e idler rouge and miss firing
07 international 4300 dt466e idler rouge and miss firing inactive code sid 254 fmi 8 controller no engine light but elect wastegate clicks 6 to 8 times when the key is turned on but 1 click under valv… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
Ih 4700 dt466e #4 fuse short wiring diagram? International
international 4700 flatbed dt466e #4 fuse interior box dead short unpluged ecm still shorted what else does this fuse feed … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
431 satisfied customers
1998 Peterbilt 379. 12.7 DDEC 4 engine. Engine will
1998 Peterbilt 379. 12.7 DDEC 4 engine. Engine will occasionally jump from 850 rpm idle to 1600 plus RPM idle on its own. Threw a code of 91 3 1 this morning when it did it. I'm guessing according to … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
431 satisfied customers
I have a DT466E Internatinal truck (96 model 4900 series).
I have a DT466E Internatinal truck (96 model 4900 series). Truck was running fine. Checked fuel filter. Replaced fuel filter. Blowed fuse on battery box. Replaced fuse. Crank on ether only. Will not s… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,886 satisfied customers
Codes 221 4 and all injectors short to ground, 2005 4300
I have checked all harnesses from batteries to idm moidule. truck runs great at idle and will not throw codes until about 1600 rpm and then just stumble like crazy … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,886 satisfied customers
1997 IH 4600 fire truck DT466E last 8 of vinWH537274. Eng
1997 IH 4600 fire truck DT466E last 8 of vinWH537274. Eng s/n 466HM2u1071294 249hp 2244 engine hours. Started with engine dying a couple of times when driven and pumped under light load. It would rest… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,886 satisfied customers
Im working on a 2007 International 4300 with DT466E that has
Hi, Im working on a 2007 International 4300 with DT466E that has 3 codes that wont go away. SID0034 EBP sensor Voltage below Normal or Shorted to Low source and 2 instances of: SID0027 VGT Actuator #1… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,886 satisfied customers
Ive got a DT466E here that randomly dies when its hot, usually
Ive got a DT466E here that randomly dies when its hot, usually only when you come to a stop.I got 2 codes that keep coming up. IDM feedback toggle not detected by ECM SID 155 FMI 11 Engine using field… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,886 satisfied customers
I have a 2007 international 4300 with jerrdan rollback bed ,
I have a 2007 international 4300 with jerrdan rollback bed , when I work the bed and the winch , high idle usually kicks in automatic when the levers are pressed . It has stoped working , I have chang… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,886 satisfied customers
I have 07 International with a dt466 that starts hard in
Hi I have 07 International with a dt466 that starts hard in morning and has a lot of black smoke then runs good after it warms up. I have replace cam sensor and ebp sensor, but the ebp senor has a rea… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,886 satisfied customers
2005 international 4300 with dt466e Truck has a miss while
2005 international 4300 with dt466e Truck has a miss while driving and generally crappy drive ability Codes as follows: SID 1- FMI 5- flash code 421 cyl 1 low side to high side open (it has this kind … read more
Travis A. Wells
Travis A. Wells
Truck Mechanic
Associates of Applied Science
15 satisfied customers
have a 98 international with a dt466e. driver says no power
have a 98 international with a dt466e. driver says no power with a load of wood chips on. pulled two codes. 1. external fuel command voltage below normal or shorted low. 2.boost pressure voltage below… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
5,234 satisfied customers
I have an international dt466e that will not start. The icp
I have an international dt466e that will not start. The icp is between 800 and 900 psi while cranking, fuel pressure is at 60 psi, and there is 12.3 volts going to the computer. The engine had been ru… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,886 satisfied customers
1996 IH Model 4900 dt466e engine. Engine cuts in and out very
1996 IH Model 4900 dt466e engine. Engine cuts in and out very rapidly under throttle. Starts and idles fine. Active engine faults pid 84 fmi3 voltage above normalx1. and sid 21 fmi2 engine position se… read more
NavistarMaster
NavistarMaster
master diesel technician
Associate Degree
44 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Daniel Wilson

Daniel Wilson

11,886 satisfied customers

Owner at DJ Wilson

Cat Man

Cat Man

Cat Engine Expert

5,234 satisfied customers

I am ASE Master Truck Certified.

Wayne

Wayne

Journeyman

4,023 satisfied customers

worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Jeremy

Jeremy

Certified Truck/Bus Technician

2,740 satisfied customers

ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, Network Engineer specializing in CAN faults, Aftertertreatment, and vehicle communications

cumminsdr

cumminsdr

Mechanic

1,700 satisfied customers

All types of Cummins applications

Curtis B.

Curtis B.

Technician

1,571 satisfied customers

Technician turned service manager on multiple lines of trucks and engines, used in industry.

Chris (aka-Moose)

Chris (aka-Moose)

Technician

353 satisfied customers

24 years of experience diagnosing & repairing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x