Medium and Heavy Trucks

Have truck repair questions? Ask an Expert

Connect one-on-one with {0} who will answer your question

Related Medium and Heavy Trucks Questions
DT466E crank / no start. 2006 IH 8100 DT466E. Repairing
Repairing myself. Engine will fire right up on ether and immediately run smooth with no smoke. I have replaced all injector orings, replaced one complete injector, replaced check ball before primer pump, replaced oil pressure sensor due to Solus not showing immediate pressure, and injector harness under cover. I have a manual fuel guage on the system showing 55 psi during cranking and 60 psi after it lights. Solus is showing around 900 psi desired and same actual during cranking. Solus is showing 175-180 rpm during cranking. The only codes that are active are for intake pressure since valve cover is off and sensor is unplugged. … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,902 satisfied customers
03 chev 6500 7.8 isuzu 4 speed auto fuel line rusted between
03 chev 6500 7.8 isuzu 4 speed auto fuel line rusted between water sep and pump repaired and primed but have no fuel rail pressur scaner showes that there is cam and crank signals … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
431 satisfied customers
Isb cummins wont start. 2004 Ford 750S. ISB cm850 cummins.
Yes. Im a Diesel Repair shop. New injectors,new fuel pump,New fuel psi sensor and high pressure ck valve. Test ECM. New lift pump. Has a active code of 2215 … read more
Wayne
Wayne
Journeyman
Vocational, Technical or Trade Scho
4,023 satisfied customers
Having issues with an Isuzu NPR-HDIsuzu 4HK1 5.2L 4cyl run
having issues with an Isuzu NPR-HDIsuzu 4HK1 5.2L 4cyl run rough idle when in gear/drive or any gear other than neutral or park. Noticed when in neutral or park when desired fuel psi is stable unit do… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
208 satisfied customers
Spoke a bunch about vt365 with high psi oil problem got
Hi spoke a bunch about vt365 with high psi oil problem got truck running but having some issues… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
208 satisfied customers
I have a 2007 international with the 466, ran fine when
hello! I have a 2007 international with the 466, ran fine when parked now it will not even start on ether. … read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
208 satisfied customers
I have a 6hk1 7.8l Isuzu in a 2005 gmc 5500 cyl #3 is
I have a 6hk1 7.8l Isuzu in a 2005 gmc 5500 cyl #3 is missfireing in a pattern miss for 4 seconds fires for 4 seconds all injectors are reman replaced 50 miles ago switched location of #2 and #3 cylin… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,902 satisfied customers
I have 2005 isuzu npr with a 5.2l diesel. died while
I have 2005 isuzu npr with a 5.2l diesel. died while driveing and will not restart. vin# ***** engine is rjs/4hk1… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
208 satisfied customers
I have a international 4300 2002 model with dt466 that
I have a international 4300 2002 model with dt466 that starts only with ether, has no codes, fuel pressure is OK while cranking, above 35psi. Just shut it off then doesnt turn on right away. While its… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,902 satisfied customers
ISUZU 2003 FRR Intermittent, Miisssing, Skipping ,Spitting,
ISUZU 2003 FRR Intermittent, Miisssing , Skipping ,Spitting, Sputtering...Stopped Running JALF5C13X37701175 6HK1-TC Engine L6, 7.8L; Turbo Diesel-I/C / Duramax (LG4)COMPLAINT: Intermittent, Missing , … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,902 satisfied customers
I have a 2007 international with a dt466 and it won't start.
I have a 2007 international with a dt466 and it won't start. I've checked fuel pressure and injection control pressure they are good. What else to check?… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,902 satisfied customers
Isuzu Fvr 34: we are currently having starting problems
Hi we are currently having starting problems with an Isuzu truck fvr34 2005' model 6hk1-Tc, non common rail system. Cranks over for too long before starting and seems to lack power. Glow plugs test ok… read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
35,769 satisfied customers
Catman, I asked you a question a few weeks ago regarding
Hey there catman, I asked you a question a few weeks ago regarding a “crank but no start” problem on a cat C15. It seems to be happening again. The truck in question is a 2007 peterbilt 379 (674827) c… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
5,234 satisfied customers
2006 GMC Truck C6500 7.8 L 7790 CC L6 Isuzu 6HK1TC Diesel ,
2006 GMC Truck C6500 7.8 L 7790 CC L6 Isuzu 6HK1TC Diesel , I need injector install directions and torque specs : Original problem , Truck cuts out and sputters at 2200 rpm and clears up at higher rpm… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,902 satisfied customers
i have a 2001 isuzu ftr 7.8l diesel that will not start
i have a 2001 isuzu ftr 7.8l diesel that will not start after cutting off. Engine will start off of ether. changed fuel filters… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,902 satisfied customers
I have an 07 international 4300 with a DT 466 been
I have an 07 international 4300 with a DT 466 been experiencing running issue fuel pressure drops almost to zero at the Schrader valve changed the regulator inside the fuel filter housing An the lift … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,902 satisfied customers
Ok I had a problem with dd15 that its fuel pressure doesn't
Ok I had a problem with dd15 that its fuel pressure doesn't stays. It's hard to start it after 3 hrs and I connect external fuel gauge to in line the pressure fluctuate at the range of 20 psi means it… read more
Clayton
Clayton
Technician
Vocational, Technical or Trade Scho
627 satisfied customers
I have a 04 izuzu ftr with aq no start condition it died driving
I have a 04 izuzu ftr with aq no start condition it died driving down the road is there a common problem on these… read more
Curtis B.
Curtis B.
Technician
Associate Degree
1,571 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Daniel Wilson

Daniel Wilson

11,902 satisfied customers

Owner at DJ Wilson

Cat Man

Cat Man

Cat Engine Expert

5,234 satisfied customers

I am ASE Master Truck Certified.

Wayne

Wayne

Journeyman

4,023 satisfied customers

worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Jeremy

Jeremy

Certified Truck/Bus Technician

2,740 satisfied customers

ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, Network Engineer specializing in CAN faults, Aftertertreatment, and vehicle communications

cumminsdr

cumminsdr

Mechanic

1,700 satisfied customers

All types of Cummins applications

Curtis B.

Curtis B.

Technician

1,571 satisfied customers

Technician turned service manager on multiple lines of trucks and engines, used in industry.

Chris (aka-Moose)

Chris (aka-Moose)

Technician

353 satisfied customers

24 years of experience diagnosing & repairing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x