How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 11340
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

We have a 2011 international durastar with an a 300 duramaxx

Customer Question

we have a 2011 international durastar with an a 300 duramaxx engine. im looking for a diagram or location of the tc1top sensor and part number.
Submitted: 3 years ago.
Category: Medium and Heavy Trucks
Customer: replied 3 years ago.
maxxforce engine** sorry
Expert:  Daniel Wilson replied 3 years ago.

Hi my name is***** is the engine model from the ID tag? Maxforce 11, 13, etc?

Customer: replied 3 years ago.
model is an a300 engine family is a maxxforce dt
Customer: replied 3 years ago.
engine model is an A300 engine family is maxxforce dt
Expert:  Daniel Wilson replied 3 years ago.

Maxxforce 7.... bare with me while i look this up

Customer: replied 3 years ago.
Ok thank you
Expert:  Daniel Wilson replied 3 years ago.

This is built into the Air Control Valve Assembly. I dont believe it is serviced separately.

Expert:  Daniel Wilson replied 3 years ago.

What is the complete engine model and serial number from the ID tag? Or your local dealer can pull it up by VIN as you want to be sure to get the right parts per engine SN. Let me know

Customer: replied 3 years ago.
Do you have a diagram showing the location of the assembly
Expert:  Daniel Wilson replied 3 years ago.

Outlet piping of the turbo after the Charge air cooler on the intake side of the engine with the EGR valve

Expert:  Daniel Wilson replied 3 years ago.

This is what it looks like on a maxxforce 13

Throttle valve

Customer: replied 3 years ago.
What about on a 7?
Expert:  Daniel Wilson replied 3 years ago.

I dont have a picture for you unfortunately, I do service not parts. I would have to get yout VIN, contact the dealer parts vendor and get you a picture. They are closed at the moment It is almost 6:30 EST where I am