How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 28917
Experience:  Technician turned service manager on multiple lines of trucks and engines, used in industry.
Type Your Medium and Heavy Trucks Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a gilcrest pro pvver 813 and the hydraulics stalled

Customer Question

i have a gilcrest pro pvver 813 and the hydraulics stalled the engine and wont disengage
JA: What is the complete model and serial number of your machine?
Customer: 2004 813rt ser.(###) ###-####2503
JA: Are you fixing this yourself? What have you tried so far?
Customer: not much burnt up one startr then triedf not running power through the sitck direct to the starter and still the same engine will hardley turn over straining from tjhe hydraulics
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: no
Submitted: 11 months ago.
Category: Medium and Heavy Trucks
Expert:  Curtis B. replied 11 months ago.

One of the hydraulic controls is on, loading the hydraulic system. Have you checked each lever , to be sure all are in neutral? If all controls are in neutral, pump may be bad! Remove the pump and see if engine runs and if ump can be turned manually.

Expert:  Curtis B. replied 11 months ago.

see question is still open, did you find problem with hydraulics?