How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask go-west.. Your Own Question
go-west.., Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1225
Experience:  Technican with 20 years experience focused on engines and electrical.
Type Your Medium and Heavy Trucks Question Here...
go-west.. is online now
A new question is answered every 9 seconds

2012 Freightliner casccadia engine dd15. Changed clutch

Customer Question

2012 Freightliner casccadia engine dd15. Changed clutch automatic transmission after that for fault codes came. Acm pt ca dm1 message has not received or stopped arriving fault codes 625- 9 and 1231- 9. Checked all harnesses and checked everything
Submitted: 11 months ago.
Category: Medium and Heavy Trucks
Expert:  go-west.. replied 11 months ago.
Good evening
That code is directly related to the harness that goes over the transmission. It was disturbed while the clutch was being done and now there either a broken wire or a fuse has poped. Go to the fuse box at the firewall that has the one heavy battery cable is going in the three going out of it the fuse for the ACM is there. If ok pull the loom back of the harness above the tranny and look for broken wires. Have a look and let me know how you do.