How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andy Your Own Question
Andy
Andy, Truck Diagnostic Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1673
Experience:  International and Isuzu trucks , International, Maxxforce, Cummins and Isuzu engines, Diagnostic and electrical troubleshooting specialist , Hvac and truck /trailer refrigeration troubleshooter
30303843
Type Your Medium and Heavy Trucks Question Here...
Andy is online now
A new question is answered every 9 seconds

2010 international maxxforce7.6 no start replaced hpop,

Customer Question

2010 international maxxforce7.6 no start replaced hpop, hpro, an injector orings,icp, an ipr sensor. kepp getting code for icp an still no start what could it be ?
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Andy replied 1 year ago.

Hi there . My name is Andy ! Can we start with the last 8 digits of the vin number please ?

Customer: replied 1 year ago.
bh283788
Expert:  Andy replied 1 year ago.

Have you just replaced these items ? you may just need a battery charger on it and a few long cranks to get it going because the high pressure rail was emptied when replacing the o-rings

Expert:  Andy replied 1 year ago.

Can you check the faults and tell me what is active ?

Customer: replied 1 year ago.
Icp, low Oil pressure
Expert:  Andy replied 1 year ago.

I need actual fault code numbers so that i could send the proper troubleshooting steps .

Expert:  Andy replied 1 year ago.

Do you still need help on this ?

Expert:  Andy replied 1 year ago.

Do you have the fault numbers ?