How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask roybelding Your Own Question
roybelding
roybelding, Shop Foreman Freightliner trucks
Category: Medium and Heavy Trucks
Satisfied Customers: 5719
Experience:  Shop Froeman for Freightliner Trucks
3506196
Type Your Medium and Heavy Trucks Question Here...
roybelding is online now
A new question is answered every 9 seconds

I have a Freightliner Columbia 2007 with a Detroit 60, The

Customer Question

Hello there
JA: Hello. What seems to be the problem?
Customer: I have a Freightliner Columbia 2007 with a Detroit 60
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Equipment Mechanic can help you best.
Customer: The check engine and engine protect light keeps coming on with a code ecu 128 pid 111 fail 1
JA: Is there anything else the Heavy Equipment Mechanic should be aware of?
Customer: Lost of power when the light is on
I replaced the coolant level sensor and the wires connected to the sensor
Submitted: 11 months ago.
Category: Medium and Heavy Trucks
Customer: replied 11 months ago.
the coolant reservoir is on the right level
Expert:  roybelding replied 11 months ago.

good evening my name is ***** ***** I will assist

I attached a picture of the wiring for you to view. check for continuity of the wires to verify the harness is good.

Roy

Customer: replied 11 months ago.
That's not the right one.
Expert:  roybelding replied 11 months ago.

thats just a general picture from freightliner. it is still the 2 wire switch. it is not a sensor it is a switch

Roy

Customer: replied 11 months ago.
Ok. But the sensor and wires are new
Expert:  roybelding replied 11 months ago.

all the way back to the ecm???

the chart says to verify the harness by checking continuity. did you do that????

Roy

Expert:  roybelding replied 11 months ago.

how are you making out

Expert:  roybelding replied 11 months ago.

please dont forget to rate me as it is the only way I get paid for my efforts

Roy

Expert:  roybelding replied 11 months ago.

please dont forget to rate me as it is the only way I get paid for my efforts

Roy

Expert:  roybelding replied 10 months ago.

please dont forget to rate me as it is the only way I get paid for my efforts

Roy

Expert:  roybelding replied 10 months ago.

please dont forget to rate me as it is the only way I get paid for my efforts

Roy

Related Medium and Heavy Trucks Questions