How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 9834
Experience:  worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling
Type Your Medium and Heavy Trucks Question Here...
Wayne is online now
A new question is answered every 9 seconds

2007 fuso i need to replace rear axle seals, fe140, i need

Customer Question

2007 fuso i need to replace rear axle seals
JA: What's the make/model/year of your truck? Engine type?
Customer: fe140
JA: Are you fixing your truck yourself? What have you tried so far?
Customer: i need torque specs for rear axle nuts
JA: Anything else you want the truck mechanic to know before I connect you?
Customer: no
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne

I will help you with this

you need the lug nut torque

or the bearing nut torque

Customer: replied 1 year ago.
rear axle seal replacement inner and outer so i need bearing nut torque for inner and outer nut.. unfortunately my mitchell doesnt have fuso
Expert:  Wayne replied 1 year ago.

Thank you for that

the bearing nut torque is 10-12 Ft lbs for inner

the outer is 120-130 ft lbs

I hope this helped you

Hi. If this helped you,

please remember to rate my answer 3 or more stars.

If more info is needed, use the reply button -


Customer: replied 1 year ago.
it only had a single retainer nut......
Expert:  Wayne replied 1 year ago.


OK for the 1 nut system

use a NEW nut and Torque to 180 Ft lbs and then stake the nut

Expert:  Wayne replied 1 year ago.


Just a follow up with you

did my answer help you

let me know,


Customer: replied 1 year ago.
Unfortunately the info did not pertain to the actual Mitsubishi fuso fe140 i was working on... but i truly appreciate it.
Expert:  Wayne replied 1 year ago.


Sorry I could not help

Just for my own info , what torque did you have