How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andy Your Own Question
Andy
Andy, Truck Diagnostic Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1649
Experience:  International and Isuzu trucks , International, Maxxforce, Cummins and Isuzu engines, Diagnostic and electrical troubleshooting specialist , Hvac and truck /trailer refrigeration troubleshooter
30303843
Type Your Medium and Heavy Trucks Question Here...
Andy is online now
A new question is answered every 9 seconds

We changed the A,C. compressor,Dryer and orvive tube and I'm

Customer Question

We changed the A,C. compressor,Dryer and orvive tube and I'm trying to clear the A.C. Codes but am having a hard time finding the procedure and the steering wheel cruse buttons have all the writing worn off of them. Vin#1HSHXAHR07J377603 8600 SBA 6X4
JA: We'll do all we can to help. Is there anything else the Heavy Truck Mechanic should be aware of?
Customer: No that should do it.
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne

I will help you with this

what are we working on, please

Make,Model and Year

Customer: replied 1 year ago.
2007 International 8600 SBA 6X4 VIN# *****
Expert:  Wayne replied 1 year ago.

Hi

Thank you for that

at the end of the codes ,the a means active and the p means previously active . you can not clear active codes.once code goes to p {or inactive } after repairs made, try putting on the left turn signal and with key on ,eng off hold down the cruise on button and the resume button at the same time , other wise you need to have a scan tool to clear

I hope this helped you

Hi if this helped you

Please rate my answer 3 or more stars

If need more info use the info button

Not Poor/Bad service

Customer: replied 1 year ago.
The cruse buttons are worn smooth with not writing at all its would be me just guessing at what they mean I know the one to the far left I the horn but other than that I'm guessing.
Expert:  Wayne replied 1 year ago.

Thank you for that

It been awhile since I seen one also

it won't hurt anything to trial and error

just keep pushing the buttons until you find the cruse and resume

Expert:  Andy replied 1 year ago.

Hi there ! My name is Andy ! I will send it to you in a moment !

Expert:  Andy replied 1 year ago.

https://www.dropbox.com/s/tk6fbao5geml169/checking%20body%20controller%20faults.txt?dl=

This shows you how to retrieve body controller faults and at the bottom , it shows you ho to clear faults . If a fault returns after clearing , it is because the problem still exists ( active )

Expert:  Andy replied 1 year ago.

I will try and send a pic of the steering wheel

Customer: replied 1 year ago.
Thanks just a rough diagram of the left and right switches will do.Thanks
Customer: replied 1 year ago.
I'm getting a code 613_14A and my compresser still won't come on
Expert:  Andy replied 1 year ago.

I need the complete number of the fault please . Can you take a pic and send it ?

Expert:  Andy replied 1 year ago.

We can use Skype to diagnose this further if you wish !

Expert:  Andy replied 1 year ago.

Do you still need help with this ?

Expert:  Andy replied 1 year ago.

I work for a dealer and am sure I can get to the bottom of this for you

Expert:  Andy replied 1 year ago.

Do you have a pic of that fault on the display ? There are more numbers needed to identify the problem thoroughly

Expert:  Andy replied 1 year ago.

Are you still needing help ?

Related Medium and Heavy Trucks Questions