How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 9835
Experience:  worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling
6825259
Type Your Medium and Heavy Trucks Question Here...
Wayne is online now
A new question is answered every 9 seconds

I put the fuel injection pump and now it's has the rpm it

Customer Question

I put the fuel injection pump and now it's has the rpm it need but now it's smoking alot it's on that 1995 ford L9000
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne

Thank you for requesting me,

that is the L10, correct

so now you need to run the over head

go her , scrol down click here

I hope this helped you

Hi. If this helped you,

please remember to rate my answer 3 or more stars.

If more info is needed, use the reply button -

NOT THE POOR/BAD SERVICE

Customer: replied 1 year ago.
Ok that to calibrate the injectors but do how exacly do you calibrate them is there a video or how about to do it
Customer: replied 1 year ago.
it's the L-10 engine it's blowing alot of white smoke thru exhaust pipe
Expert:  Wayne replied 1 year ago.

HI

Yes that is unburned fuel

need to adjust the injectors

no video, just follow the steps, easy top do

I have to go to a meeting for 3-4 hours , back at 3:30Pm

Hi. If this helped you,

please remember to rate my answer 3 or more stars.

If more info is needed, use the reply button -

NOT THE POOR/BAD SERVICE

Customer: replied 1 year ago.
I have hydraulic injectors do I have to pick the up from the front to calibrate
Customer: replied 1 year ago.
also they are a 6lbs and there dripping not spraying can I turn the 1/4 more for I can get them to spray and not to drip
Customer: replied 1 year ago.
or can you send me to some one else since your going into a meeting
Customer: replied 1 year ago.
Expert:  Wayne replied 1 year ago.

Morning

Sory for the long delay

when you adjust the injectors, bottom out the screw several times,

to squeeze the fuel out of them , tighten down

back off, tighten again, several times

Hi. If this helped you,

please remember to rate my answer 3 or more stars.

If more info is needed, use the reply button -

NOT THE POOR/BAD SERVICE

Expert:  Wayne replied 1 year ago.

HI

Just a follow up with you

did you need anymore help with this

I know you do not work for Free

Please remember to rate my answer so I don't work for free

Thank You, Wayne