How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 5305
Experience:  Owner at DJ Wilson
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

My fuel is not going from the rigth to the left tanks how do

Customer Question

my fuel is not going from the rigth to the left tanks how do i fix that
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Truck Mechanic can help you best.
Customer: well it was ok until had to change clutch they say didnt touch anything but my fuel stoped going from the rigth to the left
JA: Is there anything else important you think the Heavy Truck Mechanic should know?
Customer: not that i can think of rigth now
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Truck Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 1 year ago.

Hi my name is***** is the year make and model chassis of your truck?

Customer: replied 1 year ago.
2007 international 8600
Expert:  Daniel Wilson replied 1 year ago.

Thanks for the update and Happy 4th!!! The transfer pump wont cut in unless there is enough difference between the tank levels. Bail the majority of fuel to the other tank and see if it commands the transfer pump on and if not check the level sensor and harness for problems. Click on these links for the diagrams to help. See section 9.

Schematics 1

Schematics 2

Schematics 3

Expert:  Daniel Wilson replied 1 year ago.

Hi, Did you get this resolved?

Related Medium and Heavy Trucks Questions