How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 9452
Experience:  worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling
6825259
Type Your Medium and Heavy Trucks Question Here...
Wayne is online now
A new question is answered every 9 seconds

2005 peterbilt 387 clutch wont release I replaced the clutch

This answer was rated:

2005 peterbilt 387 clutch wont release
I replaced the clutch cable
could the clutch pedal have slipped a spline?

Hi i'm Wayne

I will help you with this

did this happen after the cable was replaced ??

Customer: replied 1 year ago.

No the problem happened then i replaced the cable because the clevis and pin showed excessive wear. But the clutch still does not release

Thank you for that

can you look in the inspection hole

while someone push clutch, to see if the fingers are moving

Customer: replied 1 year ago.

Yes i did that they move but not enough to release the clutch

Unless i move the arm a little more than the cable does

Thank you for that

did you adjust the clutch internally

Customer: replied 1 year ago.

Tried but it doesn't release enough to adjust with the pedal all the way on the floor

Customer: replied 1 year ago.

I tried to but with the pedal all the way to the floor it is still not released enough to adjust

Hi

You can not have pedal to floor

must be 2" off floor or the clutch brake is on

I hope this helped you

If this helped you

Please rate my answer 3 or more Stars

If more info is need use reply button

Not Poor/Bad Service

Hi

Just a follow up with you

did my answer help you

let me know,Please

Wayne

Wayne and 3 other Medium and Heavy Trucks Specialists are ready to help you

Related Medium and Heavy Trucks Questions