How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 5549
Experience:  Owner at DJ Wilson
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have a 2002 Mack with the E7 Engine. I have a bad

Customer Question

I have a 2002 Mack with the E7 Engine. I have a bad Injector. How do I remove and replace it?
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 1 year ago.

Hi Keith, My name is***** is the complete model and serial number from the ID tag?

Expert:  Daniel Wilson replied 1 year ago.

With the Valve cover removed you remove the fuel line to the injector and then the hold down clamp. Once removed you then twist and pull the injector out from its bore. Sometimes a slide hammer injector puller is needed if the injector is stuck in its bore. In some cases a crows foot bar can be used to pry up on the injector. Let me know