How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 2595
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
Type Your Medium and Heavy Trucks Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

2007 f-650. i just inframed the engine. some of my helpers

Customer Question

2007 f-650. i just inframed the engine. some of my helpers r3moved the wiring harnesses and did the initial teardown. I have a harness I cant find where it plugs in. it comes off of the top of the transmission(allison) and has a 17 pin connector where only 12 wires are used
JA: We'll do all we can to help. Is there anything else important you think the Heavy Equipment Mechanic should know?
Customer: Yes I am pissed because I have been looking for hours. and it will not crank at the key.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Heavy Equipment Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  spankyjr1 replied 1 year ago.

Good morning sorry for delay, would you please post trans model and serial number so I can look up wiring harness?


Expert:  spankyjr1 replied 1 year ago.

Are all wires about 18 gage or do you have some that are #10 or #12?

Customer: replied 1 year ago.
the wires are all 18 ga. the tag reads A, 06M21,(###) ###-####
Customer: replied 1 year ago.
I found it they had it plugged into the headlight harness
Expert:  spankyjr1 replied 1 year ago.

Glad you got it fixed!

Take care

Related Medium and Heavy Trucks Questions