Medium and Heavy Trucks

Have truck repair questions? Ask an Expert

Connect one-on-one with {0} who will answer your question

This answer was rated:

2010 C-13 code j1939 stop running, driving down the road…

2010 C-13 code j1939...

2010 C-13 code j1939 stop running

Mechanic's Assistant: Thanks. Can you give me any more details about your issue?

Driving down the road engine stop running

Show More
Show Less
Ask Your Own Medium and Heavy Trucks Question
Answered in 4 minutes by:
3/14/2016
Technician: Cat Man, Cat Engine Expert replied 6 years ago
Cat Man
Cat Man, Cat Engine Expert
Category: Medium and Heavy Trucks
Satisfied Customers: 10,344
Experience: I am ASE Master Truck Certified.
Verified

Thanks for asking your question. I will try and help you out.

So the engine stopped running abs will not restart?'

And all you have is a J1939 code on the dash?

Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 6 years ago
plug in the pro-link will not comunicate
Technician: Cat Man, Cat Engine Expert replied 6 years ago

Thanks for the information.

If you have the J1939 code and or the yellow check engine light does not come on when the key is turned to the on position and the engine will not start, there are only 2 things that can cause this.

The first and most common is the engine ECM is not getting the correct power and ground to function. The ECM should have power on pins 52, 53, and 70 of the rear most ECM connector. This is the truck side harness connector. 70 is the key switch wire. The grounds are on pins 65 and 67. You can remove the connector and check for power on these pins. If you do not have power on these pins, you most likely have a blown fuse in the electrical system. I would check all fuses first.

If you do have correct power and ground to the ECM, you most likely have a failed ECM. I have seen this many times over the years. To confirm the ECM is bad, you would need to install a known good ECM on the engine or you can take the ECM to the dealer to be tested. Unfortunately the ECM cannot be repaired. Replacement is the only option. I am sorry. I wish I had better news.

Please reply back if you need more help or have more questions. I am happy to assist.

Cat Man
Cat Man, Cat Engine Expert
Category: Medium and Heavy Trucks
Satisfied Customers: 10,344
Experience: I am ASE Master Truck Certified.
Verified
Cat Man and 87 other Medium and Heavy Trucks Specialists are ready to help you
Ask your own question now
Technician: Cat Man, Cat Engine Expert replied 6 years ago
Phone call session started
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a technicianLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Cat Man Your Own Question
Cat Man
Cat Man
Cat Man, Cat Engine Expert
Category: Medium and Heavy Trucks
Satisfied Customers: 10,344
10,344 Satisfied Customers
Experience: I am ASE Master Truck Certified.

Cat Man is online now

Related Medium and Heavy Trucks Questions
I have a 2010 peterbilt 387 with a dual cam isx. I have no
I have a 2010 peterbilt 387 with a dual cam isx.I have no j1939 communication coming from from the truck… read more
Nich1019
Nich1019
Diesel Technician
Vocational, Technical or Trade School
63 satisfied customers
Mx 13 runs a good regin but no reading from upstream and
mx 13 runs a good regin but no reading from upstream and down stream nox sensors causing spn3216 … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,062 satisfied customers
Trans fault code 003 spn000070. What is this? Freightliner
Also, check trans light us on and it's flashing N/F on the dash screen… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,062 satisfied customers
I have 2016 International Pro-star with Eaton Ultra-shift 16
i have 2016 International Pro-star with Eaton Ultra-shift 16 speed. all in sudden it developed a problem it wont go past 10th gear. it has fault light on i checked the fault it is fault #13 and fault … read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
214 satisfied customers
Spn 2011 source address 11 and spn 2033 address 33 with an
spn 2011 source address 11 and spn 2033 address 33 with an occasional sluggish throttle response on a 2014 freightliner dd 13 … read more
Expert
Expert
10,510 satisfied customers
I pulled engine codes and can make no sense of them. I have
i pulled engine codes and can make no sense of them. I have been a mechanic for 25 years and am now starting to work on medium duty vehicles. … read more
Expert
Expert
10,510 satisfied customers
I have a 07 Freightliner classic with a c-13 cat in it & it
I have a 07 Freightliner classic with a c-13 cat in it & it keeps shutting down because of engine protection mode & i have plenty of water and oil in it & not sensors are good. What could be the probl… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,062 satisfied customers
I have 2 codes showing 1 is son 3216. 2014 peterbilt 579.
norhing wanted to know what this code is vin:1xpbd49x8ed245793 … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,062 satisfied customers
I cant connect cat et display says i need a regen on the
i cant connect cat et display says i need a regen on the dash but i think ive got no power on j 1939 connector … read more
FIX-IT
FIX-IT
Comercial transport technician
Vocational, Technical or Trade Scho
829 satisfied customers
Not sure. I'm gettin A J1939 Failure but no other PID OR
Not sure. I'm gettin A J1939 Failure but no other PID OR PPID OR SID CODES. Just J1939 failure. Not sure if its the can bus harness or the ECM that's gone bad. I thought it might br either the ign bus… read more
Expert
Expert
10,510 satisfied customers
Im having problems with my cab, 2013 freightliner cascadia
IM TRYING TO FIX IT MY SELF IVE CHECKED ALL THE FUSES SO FAR AND I HAD A MECHANIC RUN THE COMPUTER BUT HE DOESNT KNOW HOW TO FIX IT … read more
Jeremy
Jeremy
Certified Truck/Bus Technician
Associate Degree
2,756 satisfied customers
Working on a09 pete 365 got a cat c-13 engine # lee19832 got
working on a09 pete 365 got a cat c-13 engine # ***** got a code of a 154 fmi 14 # ***** output driver?? need wiring diag.. and what it drives… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
10,344 satisfied customers
HAVE A 2007 8600 INTERNATIONAL WITH A CUMMINS ISM HAS MANY
HAVE A 2007 8600 INTERNATIONAL WITH A CUMMINS ISM HAS MANY FAULS, i KNOW IT NEEDS A EGR VALVE, IT WILL NOT OPEN OR CLOSE, CONECTIONS GOOD, ENGINE SN 35107608. ACTIVE 2349 CODE, AMBER, SID 146, J1587 &… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
214 satisfied customers
On an International Truck, what should we check with SPN 251
On an International Truck, what should we check with SPN 251 and FMI 19, with explanation EMC not detecting SART module on J1939?… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
214 satisfied customers
I have a 2010 Peterbilt 365. I got a J1939 code on the dash
I have a 2010 Peterbilt 365. I got a J1939 code on the dash and it shut my truck down. Can anyone help me get my truck going again?… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
10,344 satisfied customers
I have a 2009 peterbilt model 378, with a c-13 LEE18461, I
I have a 2009 peterbilt model 378, with a c-13 LEE18461, I have power on pins 52, 53, and 70, and ground on 65 and 67. I ordered a new ECM, installed the reman, and I continue to get a j1939 code on t… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
10,344 satisfied customers
I have a 2007 thomas bus, freightliner chassis, M2 model MB
I have a 2007 thomas bus, freightliner chassis, M2 model MB engine. Vin 4UZABRDJ39CZ70616 No engine performance problems. Just a Check Engine Light flashing on and off while driving. XXXXX XXXXXght on… read more
Toby
Toby
Vocational, Technical or Trade Scho
107 satisfied customers
WHAT CODES WOULD I GET IF MY TURBO WAS BLOWN IAM GETTING A
WHAT CODES WOULD I GET IF MY TURBO WAS BLOWN IAM GETTING A CODE FOR THE TURBO ACUATOR ABNORMAL UPDATE RATE AND ROOT CAUSE NOT KNOWN… read more
cumminsdr
cumminsdr
Mechanic
High School or GED
1,886 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Daniel Wilson

Daniel Wilson

6,062 satisfied customers

Owner at DJ Wilson

Cat Man

Cat Man

Cat Engine Expert

10,344 satisfied customers

I am ASE Master Truck Certified.

Wayne

Wayne

Journeyman

5,115 satisfied customers

worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Jeremy

Jeremy

Certified Truck/Bus Technician

2,756 satisfied customers

ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, Network Engineer specializing in CAN faults, Aftertertreatment, and vehicle communications

Curtis B.

Curtis B.

Technician

1,947 satisfied customers

Technician turned service manager on multiple lines of trucks and engines, used in industry.

cumminsdr

cumminsdr

Mechanic

1,886 satisfied customers

All types of Cummins applications

Chris (aka-Moose)

Chris (aka-Moose)

Technician

641 satisfied customers

24 years of experience diagnosing & repairing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x