How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 2108
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have a 2008 international maxxforce dt setting codes

Customer Question

i have a 2008 international maxxforce dt setting codes spn8001 & 8002 fmi 0
JA: We'll do all we can to help. Tell me a bit more about what's going on so the Heavy Truck Mechanic can help you best.
Customer: replaced all new injectors 2 weeks ago truck drove fine customer refueled truck & now both cylinder 1 & 2 sets 8001 & 8002 fmi 0
JA: Sometimes things that you think will be really complicated end up being easy to fix. The Heavy Truck Mechanic I'm going to connect you with knows all the tricks and shortcuts. Is there anything else important you think the Heavy Truck Mechanic should know?
Customer: how can i tell if fuel is bad & if it is bad why only 2 cylinders fail not all
JA: Our top Heavy Truck Mechanic is ready to take your case. Just pay the $5 fully refundable deposit and I'll fill the Heavy Truck Mechanic in on everything we've discussed. You can go back and forth with the Heavy Truck Mechanic until you're 100% satisfied. We guarantee it.
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne

I will help you with this

Yes bad fuel will do that

the only way to check them

is bring them to injection shop and have them POP TEST them

no ryme or reason for 2 just 2 to fail,

you can also switch the 2 out with 2 others, ,and see if you get the same code

Customer: replied 1 year ago.
sorry confused with your answer are you saying bad fuel can cause just to cylinders to perform bad or do you mean two faulty injectors,also problem will come and go sometimes only 8001 code come on only
Expert:  Wayne replied 1 year ago.

HI

Yes 2 faulty injectors from poor fuel

switched them around with 2 other cylinders

see if the issue moves or stays there on 1 & 2

Customer: replied 1 year ago.
ok & if i switch them & codes change does that mean i have faulty injectors & if they dont change where do i go from there also my question earlier how can i test for bad fuel
Expert:  Wayne replied 1 year ago.

HI

The only way to test for poor fuel is bring a sample to

fuel/oil analyst, or they sell a paste that you can check for water in the fuel

it is gray, if water turns blue

yes, if the code changes then you know the injectors are faulty

Customer: replied 1 year ago.
even if both fuel injectors are new installed few weeks ago and if code does not change where do i go from there
Expert:  Wayne replied 1 year ago.

Hi

Yes I have seen them fail out of the box

lets get them switched out 1st then we will go to what is next

Customer: replied 1 year ago.
ok thankm you will get back to you tomorrow on results
Expert:  Wayne replied 1 year ago.

That is fine