Medium and Heavy Trucks

Have truck repair questions? Ask an Expert

Ask an Expert,
Get an Answer ASAP!

What could be causing the fuel to get into the oil pan?

Customer Question
What could be causing the fuel to get into the oil pan?
Submitted: 2 years ago.Category: Medium and Heavy Trucks
Ask Your Own Medium and Heavy Trucks Question
Answered in 6 minutes by:
2/21/2016
Technician: Wayne, Journeyman replied 2 years ago
Wayne
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 11,305
Experience: worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling
Verified

Hi I'm Wayne

I will help you with this

fuel get in oil from the injector o-rings and cups

they would need to be changed

I hope this helped you

Hi if this helped you

Please rate my answer 3 or more stars

If you need more info, use request button

Not Poor/Bad service

Wayne

Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 2 years ago
Would it also cause the fuel to leak thru valve cover?
Technician: Wayne, Journeyman replied 2 years ago

Hi

Not sure what you are asking,

you mean fuel puddle in head and leak out the V/C

Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 2 years ago
The fuel is coming thru the valve cover.
Technician: Wayne, Journeyman replied 2 years ago

Thank you for that

need to remove the V/C and run it at idle and see

if the injectors are leaking or puddling

that would not be the cups that would be the injectors itself

Hi if this helped you

Please rate my answer 3 or more stars

If you need more info, use request button

Not Poor/Bad service

Wayne

Ask Your Own Medium and Heavy Trucks Question
Technician: Wayne, Journeyman replied 2 years ago

Hi

I am just following up with you

did my answer help you

let me know , Please

Wayne

Ask Your Own Medium and Heavy Trucks Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a technicianLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Wayne Your Own Question
Wayne
Wayne
Wayne, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 11,305
11,305 Satisfied Customers
Experience: worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Wayne is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Daniel Wilson

Daniel Wilson

2,803 satisfied customers

Owner at DJ Wilson

Cat Man

Cat Man

Cat Engine Expert

4,530 satisfied customers

I am ASE Master Truck Certified.

Wayne

Wayne

Journeyman

11,305 satisfied customers

worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Jeremy

Jeremy

Certified Truck/Bus Technician

2,243 satisfied customers

ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, EPA 608/609 HVAC Certified, Steering/Suspension and ABS/Brakes Technician

cumminsdr

cumminsdr

Mechanic

1,351 satisfied customers

All types of Cummins applications

Curtis B.

Curtis B.

Technician

991 satisfied customers

Technician turned service manager on multiple lines of trucks and engines, used in industry.

dieseldan55

dieseldan55

Contractor

74 satisfied customers

Road Service mechanic for Volvo Construction.

< Previous | Next >

Related Medium and Heavy Trucks Questions
My Perkins 6.354 is leaking fuel in the oil pan, I've
My Perkins 6.354 is leaking fuel in the oil pan, I've changed the life pump already and nothing change … read more
Curtis B.
Curtis B.
Technician
Associate Degree
991 satisfied customers
I dropped a non magnetic piece of metal in my motor small
I dropped a non magnetic piece of metal in my motor small clip.thying to remove a sensor valve cover got to come off to get to it still need to get sensor out … read more
Pete
Pete
Independent Auto Technician
Vocational, Technical or Trade Scho
138 satisfied customers
What can cause fuel to get in the oil pan. I drained about
what can cause fuel to get in the oil pan. I drained about 20 gallons out during a PM. Normally on this engine it's about 11. Its a dd15 engine… read more
roy
roy
Associate Degree
3 satisfied customers
Have a 2012 Freightliner Cascadia with a Detroit dd15 after
Have a 2012 Freightliner Cascadia with a Detroit dd15 after truck heats up oil pressure drops when coming down to a idle when slowing down stop engine check engine lights come on red oil pressure ligh… read more
Curtis B.
Curtis B.
Technician
Associate Degree
991 satisfied customers
I have a 1996 357 pete w/3406E. I'm getting coolant in my
I have a 1996 357 pete w/3406E. I'm getting coolant in my oil. Could it be the oil cooler? Or sleeve O-rings?… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
4,530 satisfied customers
C7 cat with codes 164-11 and 164-2 new injectors cat brand,
c7 cat with codes 164-11 and 164-2 new injectors cat brand , replaced high pressure pump … read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
4,530 satisfied customers
When changing the oil found a 3/16 bolt and screw on the
Hello , when changing the oil found a 3/16 bolt and screw on the magnet. Also found what I believe to be a piece of aluminum about 1 1/2 with an irregular shape. I believe it is aluminum because I cou… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
4,530 satisfied customers
How do I test my compressor on my Mack e7 427 to see if
How do I test my compressor on my Mack e7 427 to see if it's bad. My egr cooler was bad but I'm still puking water out of the reservoir after replacing it and the filter. Or is there anything else tha… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
2,803 satisfied customers
FIrst let state that I know very little about truck but i
FIrst let state that I know very little about truck but i dont like being taken advantage of when I take my truck to the shop so I try and get as much information as possible before heading out to the… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
4,530 satisfied customers
I have a 2006 c7 with a code of 164-2 and 164-11 we have
i have a 2006 c7 with a code of 164-2 and 164-11 we have replaced IAP sensor huei pump with new injectors wiring harness, changed oil, ran seperate fuel line from tank the truck starts then warms up a… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
4,530 satisfied customers
I have a '72 Case 580B backhoe, and every time I start it,
Hello, I have a '72 Case 580B backhoe, and every time I start it, it blows an oily silver sludge out the engine breathing tube. Any ideas what could be causing it?… read more
Curtis B.
Curtis B.
Technician
Associate Degree
991 satisfied customers
I was given a vt 880 d16 engine to time....I got the engine
I was given a vt 880 d16 engine to time....I got the engine running very well but have an oil flow issue pump,seals,oilcoolerpiston cooler tubes have been changed new-ran engine with valve cover off a… read more
spankyjr1
spankyjr1
Retired
Vocational, Technical or Trade Scho
19 satisfied customers
. I changed my oil 9800 miles back and I found two pieces
hello. I changed my oil 9800 miles back and I found two pieces of metal in my oil pan.I started experiencing some blow by a while back and oil on my fuel tanks. now I'm getting oil in my manifold on t… read more
Jeremy
Jeremy
Certified Truck/Bus Technician
Associate Degree
2,243 satisfied customers
Three days ago my 1995 freight liner would not start. I checked
Three days ago my 1995 freight liner would not start. I checked the .fuel level, oil level, battery connections and voltage, all seemed ok. The starter would engage but would not turn the engine over.… read more
Travis A. Wells
Travis A. Wells
Truck Mechanic
Associates of Applied Science
4 satisfied customers
I have 2005 c15 cat. It has supposed to have been recently
I have 2005 c15 cat. It has supposed to have been recently rebuilt and had a new oil cooler put on it. At 9000 miles after oil change it started showing low oil pressure and warning light comes on. Al… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
4,530 satisfied customers
I have a 2008 60 serious 14L I just replaced a broken injector
I have a 2008 60 serious 14L I just replaced a broken injector a lot of fuel was coming from the breather and vavle cover and replaced it and still doing it and all the fuel going into the oil… read more
spankyjr1
spankyjr1
Retired
Vocational, Technical or Trade Scho
19 satisfied customers
Have a Series 60 2001 model oil temp is running hot 250 range.
Have a Series 60 2001 model oil temp is running hot 250 range. water at 180 what could cause this… read more
JCTech
JCTech
Technical Specialist
Vocational, Technical or Trade Scho
377 satisfied customers
2000 FREIGHT LINER 120 CAT C12 ENGINE IS MIXING OIL AND AND
2000 FREIGHT LINER 120 CAT C12 ENGINE IS MIXING OIL AND AND WATER. THE OIL PRESSURE IS GOOD AND POWER IS STILL THERE. I AM THINKING THAT IT COULD BE THE WATER PUMP, BUT NOT SURE! PLEASE HELP! THANK YO… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
4,530 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x