How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 1967
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

My 1996 Kenworth has a n-14 motor but I've been having

Customer Question

hi my 1996 Kenworth has a n-14 motor but I've been having trouble with electrical problems like it looses power when running I already did a pm with new fuel filters and replaced both fuel lines .the but I keep getting this check engine light on that keeps coming on and off what can I do
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 1 year ago.

Hi Felix, My name is***** fault codes are you getting?

Expert:  Daniel Wilson replied 1 year ago.

Turn cruise off, key on, hold set/resume switch until engine light flashes. Count the flashes with short pauses in between for each digit of the 3 digit code thena longer pause between each code. Let me know what you get for codes

Customer: replied 1 year ago.
I'm getting check engine and the red engine light as well but it looses power when running too ..... ok give me a couple of minutes
Customer: replied 1 year ago.
I'm not getting codes I tried doing that but nothing happens
Expert:  Daniel Wilson replied 1 year ago.

Sorry try cruise on

Expert:  Daniel Wilson replied 1 year ago.

some trucks also have a separate diagnostic switch instead of using the cruise switches.... Key on, cruise on, hold set/resume and the check engine light should flash your fault codes

Customer: replied 1 year ago.
tried that too and no flashes
Expert:  Daniel Wilson replied 1 year ago.

If flash codes will not work can you find someone with a scanner to read the codes? We can post back and forth as needed to get to the source of this problem. If the light is on there is codes. Its 3 am and I need some sleep but will be logged in off and on throughout the day for follow ups.

Expert:  Daniel Wilson replied 1 year ago.

Hi Felix, Did you get this resolved?

Customer: replied 1 year ago.
no its going to dealer to get the problem solve thanks for your help but I payed this system for nothing hope I don't get charge for this again......
Expert:  Daniel Wilson replied 1 year ago.

Felix. no worries. Experts do not get paid thier percentage unless there positive feedback or an accepted answer...

Related Medium and Heavy Trucks Questions