How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 5443
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have 2.65v on pin 11

Customer Question

I have 2.65v on pin 11
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Daniel Wilson replied 1 year ago.

Hi, You have 2.65v on pin 11 on what vehicle? were you working with someone on an existing question? this is a new question that was posted?

Customer: replied 1 year ago.
2001 Pete 379 6nz c15. I only have 2.65v on pin 11. 12v at the override switch. I have cat et, if that helps.
Expert:  Daniel Wilson replied 1 year ago.

Click on these links for the schematics.

Schematic 1

Expert:  Daniel Wilson replied 1 year ago.

Which connector are you referring to? The ECM connector pin 11?

Customer: replied 1 year ago.
ECM connector pin 11
Expert:  Daniel Wilson replied 1 year ago.

That would be the a road speed sensor pin. The other one is 18.... Send and return signal

Customer: replied 1 year ago.
Pin 18 is blank. Schematic shows pin 11 from dash.
Expert:  Daniel Wilson replied 1 year ago.

i pulled up the diagram for the 6NZ.... Here is the file. I have to run out on a road call but can follow up later if needed. I log in as I am able throughout the day and evenings

Customer: replied 1 year ago.
Haven't found the problem yet. I'll rate when it's fixed
Expert:  Daniel Wilson replied 1 year ago.

Hi, Thanks for the update. I am assuming the site must have sent an auto generated e mail... Let me know if you need more help in the meantime with troubleshooting.