How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 2087
Experience:  Owner at DJ Wilson
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

I have a 2006 International 4300 with a DT 466 that I am

Customer Question

I have a 2006 International 4300 with a DT 466 that I am getting the following fault codes..... it was running fine and shut down suddenly and will not re-start-------- Engine #1 (MID 128) reports Controller #2 (SID 233) is Voltage below normal or shorted low (FMI 4)----
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  diesel-tech replied 1 year ago.

Did you check the ecm fuse at the battery as well as the trans fuse

Customer: replied 1 year ago.
this truck does not have the big fuse like most it instead has two standard sized 40 amp fuses in the battery box
Expert:  diesel-tech replied 1 year ago.

Request a phone call

Customer: replied 1 year ago.

What kind of information do you need?

Expert:  diesel-tech replied 1 year ago.

I don't it's faster to talk on the phone

Customer: replied 1 year ago.

We had to drop this project for a while but now I am back on it, we found a O ring on the fuel filter that I did not like the looks of, and we will be changing that out, but how can I tell if the fuel solenoid is working. Also we are going to be going down to the starter to make sure all the connections are good and no wires have pulled loose. Any other suggestions as to where to look??