How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeremy Your Own Question
Jeremy, Certified Truck/Bus Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 3320
Experience:  ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, EPA 608/609 HVAC Certified, Steering/Suspension and ABS/Brakes Technician
Type Your Medium and Heavy Trucks Question Here...
Jeremy is online now
A new question is answered every 9 seconds

I have a international 07 with a cummins isx and I have 2.

Customer Question

Hello i have a international 07 with a cummins isx and I have 2. Fault code first 128:f01 pod 094_p the other code 128:f07 sid 146_p what doses means
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  Jeremy replied 1 year ago.

My name is ***** ***** I will assist you.

Fault Code: 482

PID: P094
SPN: 94
FMI: 1/18
LAMP: Amber

Fuel Pressure Low - Data Valid But Below Normal Operating Range - Moderately Severe Level.

Engine may not start, emit white smoke, run rough, or lose power

Fault Code: 2357
PID: S146
SPN: 2791
FMI: 7/7
LAMP: Amber

EGR Valve Control - Mechanical System not Responding Properly or Out of Adjustment. EGR valvenot responding or slow to respond.

Possible low power. Power will be removed from the EGR valve motor.

For the 94 code, check your fuel filters and for blockages. Check the regulator to make sure it isn't stuck open. With the generic low pressure code, it can be a number of issues on the fuel system.

On the 146 code, replace the EGR valve. It has failed completely.

You want a 5 star service and I want to provide a 5 star service. Please consider that I don't know your skill level as well as I can't see,
touch, smell, hear, or taste the vehicle/machine in question. Please provide as much detail as possible and I will provide as much back.

The system DOES NOT automatically give me credit from your deposit. A rating is REQUIRED. You are rating me for the information I provide,
not the website. I have no control over the site fees, site errors, category errors, or how long it took for a response for these reasons.

I am not an employee of this website, so please rate with a POSITIVE (green) rating for me to get credit for assisting you. You still pay
the website for negatives or by not rating at all. I just get nothing from that payment you made. So please rate each answer I provide.

I want you pleased with my service to you so please inform me before rating negative (red) and I will do my best to make it right. Follow
ups for same question are always free after ratings have been made.

I do have many workshop manuals, diagrams, etc that I pay to get access to out of my pocket. If one is needed, please ask and I will give
you an offer at my technician discounted cost to you for such manuals. I never charge above that cost.

Thank you for allowing me to assist you through Just Answer!


Expert:  Jeremy replied 1 year ago.

I see you viewed this and this is still showing as a open question due to no positive (3 stars or more) rating.

Did you still need assistance with this?

Related Medium and Heavy Trucks Questions