How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask go-west.. Your Own Question
go-west.., Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1209
Experience:  Technican with 20 years experience focused on engines and electrical.
Type Your Medium and Heavy Trucks Question Here...
go-west.. is online now
A new question is answered every 9 seconds

I am using Diagnostic Link 6.50 and I need to know what ESN

Customer Question

I am using Diagnostic Link 6.50 and I need to know what ESN should be programmed into the DDEC IV/V ECMs in order to run the Turbocharger Actuator Service Procedure Diagnostic successfully.
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Customer: replied 1 year ago.
Sorry but I already found the answer to my question. I wan't to cancel this question. Is that possible?B.T.W. the answer to my question is 06R1999999.
Expert:  go-west.. replied 1 year ago.


I haven't done this in ages but the esn is 06R1999999

Be sure to put you original back in when your done as this is a very low hp SN

Good luck

Related Medium and Heavy Trucks Questions