How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask FSM09 Your Own Question
FSM09, Ford Senior Master
Category: Medium and Heavy Trucks
Satisfied Customers: 3629
Experience:  Ford Diesel certified, specialized in Ford diesel repair
Type Your Medium and Heavy Trucks Question Here...
FSM09 is online now
A new question is answered every 9 seconds

Altec at237 on a 2010 Ford F-550 chassis. I have lost all

Customer Question

altec at237 on a 2010 Ford F-550 chassis. I have lost all power to boom operations, no controls work in bucket or below and generator doesn't start even manually at the generator now although it did earlier today. The reserve batteries are fully charged as well as the truck battery and all connections are spotless clean. I have read the operators manual extensively and I am going through all the procedures that are listed to operate the boom. I have owned several of these type trucks over the years and know how the operations work on them but I am stumped on this one. If you have any knowledge of these please give me a call at(###) ###-#### ***** Ted
Submitted: 1 year ago.
Category: Medium and Heavy Trucks
Expert:  FSM09 replied 1 year ago.

Hello, are your controls tied to the up fitter switches?

Related Medium and Heavy Trucks Questions