How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andy Your Own Question
Andy, Truck Diagnostic Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1649
Experience:  International and Isuzu trucks , International, Maxxforce, Cummins and Isuzu engines, Diagnostic and electrical troubleshooting specialist , Hvac and truck /trailer refrigeration troubleshooter
Type Your Medium and Heavy Trucks Question Here...
Andy is online now
A new question is answered every 9 seconds

Have a 98 freightliner century w/ autoshift. has trans code

Customer Question

have a 98 freightliner century w/ autoshift. has trans code 61 rail select motor. resistace is 75 meg ohm. i think select motor is bad. can this be changed without removing trans?
Submitted: 2 years ago.
Category: Medium and Heavy Trucks
Expert:  Andy replied 2 years ago.

How much clearance do you have between the cab floor and the shifter ? You should only need a few inches to pull it out of the tranny . You may even have an access panel in the floor that can be removed to facilitate the job .

Expert:  Andy replied 2 years ago.
Hi there ! Just looking for an update ! Do you still need help with this ? Let me know . Thanks. Please do not forget to rate my service to you at the end of this session . Feedback is important . Bonus is appreciated. Thank you

Related Medium and Heavy Trucks Questions