How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andy Your Own Question
Andy, Truck Diagnostic Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1648
Experience:  International and Isuzu trucks , International, Maxxforce, Cummins and Isuzu engines, Diagnostic and electrical troubleshooting specialist , Hvac and truck /trailer refrigeration troubleshooter
Type Your Medium and Heavy Trucks Question Here...
Andy is online now
A new question is answered every 9 seconds

During cranking what should be the lube oil pressure be?

Customer Question

During cranking what should be the lube oil pressure be?
Submitted: 2 years ago.
Category: Medium and Heavy Trucks
Expert:  Andy replied 2 years ago.
If this is a dt466 , then here are the cranking specs : Engine cranking Minimum recommended battery voltage10 VMinimum cranking rpm130 rpmMinimum ICP pressure/voltage5 MPa (725 psi) / 1.0 VMinimum oil pressure/voltage138 kPa (20 psi) / 0.9 VEGRP starting0%Minimum fuel pressure/voltage138 kPa (20 psi) / 0.9 V after 10 second crank
Expert:  Andy replied 2 years ago.
Let me know if you need anything else !

Related Medium and Heavy Trucks Questions