How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andy Your Own Question
Andy, Truck Diagnostic Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 1658
Experience:  International and Isuzu trucks , International, Maxxforce, Cummins and Isuzu engines, Diagnostic and electrical troubleshooting specialist , Hvac and truck /trailer refrigeration troubleshooter
Type Your Medium and Heavy Trucks Question Here...
Andy is online now
A new question is answered every 9 seconds

2012 International Durastar 4300 7.6 L 466 L6 Intl

Customer Question

2012 International Durastar 4300 7.6 L 466 CID L6 Intl MaxxForce DT truck has no power cannot calibrate mass airflow with prolink. if I unplug mass airflow truck runs great have changed mass air flow no help
Submitted: 2 years ago.
Category: Medium and Heavy Trucks
Expert:  Andy replied 2 years ago.
Hi there ! My name is Andy ! Can we start with the last 8 digits of the vin please ? You will need to get it up to engine operating temp , then perform a standard running test , followed by a mass air flow calibration procedure using a program called servicemaxx .
Expert:  Andy replied 2 years ago.
Hi there ! Looking for an update ! Any luck ? Do you still need anything ? Let me know ! Thanks !
Expert:  Andy replied 2 years ago.
Hi there ! Just looking for an update ! Do you still need help ? Happy to assist further if needed !
Please do not forget to rate my service to you ! Feedback is important and Bonus is appreciated . Thank you !