How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask cat_engines_only Your Own Question
cat_engines_only
cat_engines_only, Other
Category: Medium and Heavy Trucks
Satisfied Customers: 2367
Experience:  Repair CAT machines only
11546476
Type Your Medium and Heavy Trucks Question Here...
cat_engines_only is online now
A new question is answered every 9 seconds

I am looking up specs international model 1310 4x4 truck 392 v8 with auto t

Customer Question

I am looking for tune up specs for a international model 1310 4x4 truck 392 v8 with auto trans, dwell point gap timing etc.
Submitted: 2 years ago.
Category: Medium and Heavy Trucks
Expert:  cat_engines_only replied 2 years ago.
Hello,I have some for 1972-1975, 8-392plug gap = .030, 1975 = .035point dwell 30point gap .019, .008 on breakerless ignition, 1972 = .016 on light duty vehiclesignition timing is TDC , except carter carb and distributer 519861 = 5 degrees BTDCCranking compression =140Valve lash is 0 in 0 exgovernor = 36005 psi fuel pressure.Auto trans idle speed 600 rpmfiring order = 1-8-4-3-6-5-7-2Set distributor timing on #8 cylinder Source Chilton 7012I hope this helps.Thanks, Donnie