How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Medium and Heavy Trucks
Satisfied Customers: 2058
Experience:  Owner at DJ Wilson
65405794
Type Your Medium and Heavy Trucks Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

Is there a way to bypass the ecu exhaust brake and

Customer Question

is there a way to bypass the ecu for the exhaust brake and just put a direct switch in to manually control the exhaust brake?
Submitted: 2 years ago.
Category: Medium and Heavy Trucks
Expert:  dieseldan55 replied 2 years ago.
I suppose you could cut into the harness by the ecu and wire to the soleniod wire there. You most likely will get an error code since it will not see the soleniod resistance on start up and i thinkl it would work. My info is for construction side of volvo but i can tell you what the pins are on our plugs and you can test to see if it the same.

Related Medium and Heavy Trucks Questions