How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeremy Your Own Question
Jeremy, Certified Truck/Bus Technician
Category: Medium and Heavy Trucks
Satisfied Customers: 3304
Experience:  ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, EPA 608/609 HVAC Certified, Steering/Suspension and ABS/Brakes Technician
Type Your Medium and Heavy Trucks Question Here...
Jeremy is online now
A new question is answered every 9 seconds

Cummins LT10A: cummins LT10A removal of crankshaft snout

Customer Question

cummins LT10A removal of crankshaft snout, there is a 6 bolt hub on the end of the crank and nothing it appears to retain it

Submitted: 2 years ago.
Category: Medium and Heavy Trucks
Expert:  Jeremy replied 2 years ago.
My name is ***** ***** I will assist you with your concerns.
I have a L10 manual, which is like the LT10A engine if it will help you out.
We usually have a machine shop remove the snout since they heat it off and heat a new one back on.

Related Medium and Heavy Trucks Questions