Medium and Heavy Trucks

Have truck repair questions? Ask an Expert

Connect one-on-one with {0} who will answer your question

Related Medium and Heavy Trucks Questions
I have a 07 International 4300 dt466 and my left side tank
I have a 07 International 4300 dt466 and my left side tank doesn't pump and my truck stalls out and the rpm drops as if the truck isn't getting gas and the it picks up again and drives. It also stalls… read more
BrentR718
BrentR718
6 satisfied customers
Catman C15 SDP engine has low power complaint fuel pressure
Catman C15 SDP engine has low power complaint fuel pressure gauge at compucheck fitting by filter showing around 270 psi. hooked supply pump to 5 gallon bucket and still getting same high fuel pressur… read more
Bradey V
Bradey V
Certificate
Started with shutting down, let it sit for 5min then it
Started with shutting down, let it sit for 5min then it would start, did this 5 times to get it back to the shop, changed the fuel filter, now won't start and have 2 active codes 128 221 04, and 128 2… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
Have a 2000 International 4300. Every few days, the truck
Have a 2000 International 4300. Every few days, the truck loses throttle response. Sometimes it does it when you first start it, sometimes while driving. It doesn't fall to idle, though. You can get S… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
Have an 06 international 4300 dr466 runs fine when cold
Have an 06 international 4300 dr466 runs fine when cold drive it for like 10 to 15 miles starts jerking and eventually dies … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,535 satisfied customers
2007 INTERNATIONAL 4300 CODE 128 155 7 CHECK ALL FUSES AT
Second opinion] 2007 INTERNATIONAL 4300 CODE 128 155 7 CHECK ALL FUSES AT BATTERY ALL GOOD CONNECTIONS GOOD. DO YOU HAVE WIREING DIAGRAM I COULD GET . … read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
I have a 2006 International 4300 dt466 that cranks but no
Hi I have a 2006 International 4300 dt466 that cranks but no start … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
418 satisfied customers
Freightliner Columbia day cab with detroit series 60 Vin#
Freightliner Columbia day cab with detroit series 60 Vin# *****It's getting frustrating. Truck shit down while running n ok t at highway speed but idling at signal .Then we had to towed it it would no… read more
spankyjr1
spankyjr1
Retired
Vocational, Technical or Trade Scho
420 satisfied customers
I have a 2007 international 4300. 2007 4300 w/ dt466 engine.
yes. truck is "bucking" like it's losing power possibly a ecm power issue. There are two red cables that attach to intake. I assume they are heater grid. they have rubber hoods. When I ran my hands over them (looking for shorted wires) it immediately shut the engine off. … read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
I am working on a 2007 international with a dt466 it has no
i am working on a 2007 international with a dt466 it has no power. tested the intercharger it doesn't leak, did the bounce test on the vgt it passes, did the air management test it keeps giving me the… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
2012 int 4300. Maxxforce 7 motor. Starts good put the
2012 int 4300. Maxxforce 7 motor. Starts good put the Allison in gear....and it takes off and quits. Pulling our hair out here and the international dealer can't figure it out either. Have run all kin… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
I have an international 2007 model 4400 and have the fuel
i have an international 2007 model 4400 and have the fuel filter light on for a week and now engine light too but still running good … read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
2008 IH 7400 VIN: 1HTWDAAR78J650132 ENGINE: GDT230, Truck
2008 IH 7400 VIN: 1HTWDAAR78J650132 ENGINE: GDT230, Truck died was running fine before scanned for codes, pulled fuel filter there was very little fuel, filled fuel bowl and primed the system with the… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
cummins man I have a Maxforce 13 2012 with over 100 oil
cummins man I have a Maxforce 13 2012 with over 100 oil pressure. I have heard this could come from the pump. Has fresh filters, new regulator and with a gauge over 100 upon start up. could some retur… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
2002 international 4300 dt466e.Having trouble keeping it
2002 international 4300 dt466e.Having trouble keeping it idleing. Runs fine at high idle. I have replaced primer pump,lift pump,the little rubber ball behind the sediment bowl. I have cleaned sediment… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,535 satisfied customers
Can I get engine oil pressure anywhere on the right side (turbo
Can I get engine oil pressure anywhere on the right side (turbo side) of a cummins L10E? I tried a port at the filter base that likely is tee'd with the turbo oil feed and no pressure. Any ideas or do… read more
Geoff
Geoff
BS
12 satisfied customers
i have a 1999 international with a dt466e and i have a no
i have a 1999 international with a dt466e and i have a no start condition. 1. Truck will crank 2. no actual icp pressure but has desired pressure 3. oil pressure show on dash but not on computer until… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
I have a 2007 International 4300 with a MAX 7. 8N692502.
I have a 2007 International 4300 with a MAX 7. 8N692502. Engine is derated, codes 1213 FMI 4 , 2785 FMI 13 exist. Performed a manual reg. using maxforce software. Engine idles up , but don't know if i… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
11,535 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Daniel Wilson

Daniel Wilson

11,535 satisfied customers

Owner at DJ Wilson

Cat Man

Cat Man

Cat Engine Expert

5,234 satisfied customers

I am ASE Master Truck Certified.

Wayne

Wayne

Journeyman

4,023 satisfied customers

worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Jeremy

Jeremy

Certified Truck/Bus Technician

2,740 satisfied customers

ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, Network Engineer specializing in CAN faults, Aftertertreatment, and vehicle communications

cumminsdr

cumminsdr

Mechanic

1,700 satisfied customers

All types of Cummins applications

Curtis B.

Curtis B.

Technician

1,571 satisfied customers

Technician turned service manager on multiple lines of trucks and engines, used in industry.

Chris (aka-Moose)

Chris (aka-Moose)

Technician

353 satisfied customers

24 years of experience diagnosing & repairing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x