Medium and Heavy Trucks

Have truck repair questions? Ask an Expert

Connect one-on-one with {0} who will answer your question

We have a 2008 Mack chu 613. The codes keep coming up on sensors…

Customer Question
We have a 2008 Mack...
We have a 2008 Mack chu 613. The codes keep coming up on sensors that we already replaced. We have heard from others that there was a big problem with the wiring on that year...do you have any information that could help me sort out and solve this problem
Submitted: 10 years ago.Category: Medium and Heavy Trucks
Show More
Show Less
Ask Your Own Medium and Heavy Trucks Question
Answered in 17 hours by:
8/30/2012
Technician: Michelle-mod, Moderator replied 10 years ago
Michelle-mod
Michelle-mod, Moderator
Category: Medium and Heavy Trucks
Satisfied Customers: 21
Experience: Moderator
Verified


Hi, I'm a moderator for this topic. I've been working hard to find a Professional to assist you right away, but sometimes finding the right Professional can take a little longer than expected.


I wonder whether you're ok with continuing to wait for an answer. If you are, please let me know and I will continue my search. If not, feel free to let me know and I will cancel this question for you. Thank you!

Ask Your Own Medium and Heavy Trucks Question
Technician: spankyjr1, Journeyman replied 10 years ago
spankyjr1
spankyjr1, Journeyman
Category: Medium and Heavy Trucks
Satisfied Customers: 2,873
Experience: I worked on all types of equipment semis,forklifts,farm,ect.
Verified
Hi I will help with your problem Please do not rate until all your questions are answered that way you wont have to pay twice Use reply to expert link.Thanks
If you are new to the site, this is briefly how it works:

1. We will go back and forth exchanging information (if needed) and there is no extra cost for replying.
2. I will only give you the best possible Answer for your problem without the ability of actually being present with you.
3. Remember to leave a Positive Rating after we're finished.

We need to start with what was replaced not all of them just a general Idea,so I will know which way to direct checks.
Next what is the current code if any?
Ask Your Own Medium and Heavy Trucks Question
Technician: spankyjr1, Journeyman replied 10 years ago
It's showing that you responded but I don't see any information They are having some tech issues so please bare with us I will return any and all replies you make asap Thanks spanky
Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 10 years ago

It really took a lot longer to get the first response. Had to run it back into the shop on a long haul in the middle of no where. A shop hand and I reworked all the codes and wires and found the problem. Thanks anyway.

Technician: spankyjr1, Journeyman replied 10 years ago
No problem, they were having tech issues and we weren't seeing questions or responses sorry about there problems. If you ever need something else ask for me and I will get on it asap.Have a great holiday weekend I'll put in for a refund for you so you won't get charged take care spanky
Ask Your Own Medium and Heavy Trucks Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a technicianLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson
Daniel Wilson
Category: Medium and Heavy Trucks
Satisfied Customers: 6,195
6,195 Satisfied Customers
Experience: Owner at DJ Wilson

Daniel Wilson is online now

Related Medium and Heavy Trucks Questions
My mack 2016 chu 613, is showing a lightning bolt and
My mack 2016 chu 613 , is showing a lightning bolt and engine, the engine was the sensor in front os the truck… read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
Mack CXU 613 with an MP 8 getting code P02D5 FMI:00 #5
Mack CXU 613 with an MP 8 getting code P02D5 FMI:00 #5 injector learned offset a maximum value… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,195 satisfied customers
Need to do a forced regen on my 2014 mack chu using the Tech
Need to do a forced regen on my 2014 mack chu using the Tech Tool program,is there any videos that can help me … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
2014 chu mp8, engine acts like out of fuel will not run. No
2014 chu mp8, engine acts like out of fuel will not run. No fuel pressure at secondary filter, have replaced lift pump blew out lines still no flow. What's next? … read more
Edgar.T
Edgar.T
Forman
Associate
96 satisfied customers
Engine light is on have code SPN 4811 FMI 2. SPN 110 FMI 2
Engine light is on have code SPN 4811 FMI 2 JA: Is the check engine light blinking or flashing, or is it solid? When did you first notice it? Customer: SPN 110 FMI 2 code engine light solid JA: What's… read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
SCR system fault 2013 CHU 613 pinnacle. MP8 505 hp 2013 Mack
SCR system fault 2013 CHU 613 pinnacle JA: What's the make/model/year of your truck? Engine type? Customer: MP8 505 hp 2013 Mack CHU 613 JA: Are you fixing your truck yourself? What have you tried so … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
My suspension load gauge is inoperable and I suspect a bad
My suspension load gauge is inoperable and I suspect a bad sensor but have no idea where it's located … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
My 1992 613 has an emergency shut down problem. Could it be
my 1992 613 has an emergency shut down problem. Could it be a bad oil sensor or water level sensor? … read more
Wayne
Wayne
Journeyman
Vocational, Technical or Trade Scho
5,115 satisfied customers
I have a 2008 Mack CHU 613. What would cause it to lose
I have a 2008 Mack CHU 613. What would cause it to lose power in the top end of each gear?… read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
I had a fan belt break on my 2008 Mack CHU613 Pinnacle and
I had a fan belt break on my 2008 Mack CHU613 Pinnacle and the connected for the fan side control clutch ripped off. I need to know how to rewire without buying the entire assembly. … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
I have a 2017 Mack/CHU. With an engine light on. The codes
I have a 2017 Mack/CHU. With an engine light on. The codes that come up are P24D1, P24AF, P249F and P24AO. The first I'm pretty sure is for a PM sensor. … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
I have a 2006 chn 613 with an aset will not start. # 6 eup
I have a 2006 chn 613 with an aset will not start. # 6 eup bolts broke engine stopped replaced Orings and bolts. I have fmi 4 inactive code on all 6 eup … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
09 chu 613 surges in high gear. 2009. Ch613. Mack. Changed
Changed filters fixed wiring on egr pressure sensor … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
2010 mack chu 613 PSID 46 FMI 0 and PPID 270 FMI 9. 2010
2010 mack chu 613 PSID 46 FMI 0 and PPID 270 FMI 9 … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
2008 mack ch 613 lightin bolt on then shuts down lightin
2008 mack ch 613 lightin bolt on then shuts down lightin bolt been on for over a week just started shuttin down. Was low in water filled it but still shutn down … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
I have a Mack chu 2008 mp8 motor... engine will not go 1500
I have a Mack chu 2008 mp8 motor... engine will not go 1500 rpm's … read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
2011 Mack CHU-613 Mack MP8 will not crank. When I turn the
2011 Mack CHU-613 Mack MP8 will not crank. When I turn the ignition switch I can hear the relay click on top of dash relay panel but I do not get voltage to starter. I have good battery voltage at sta… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,195 satisfied customers
I am switching out a 2005 Mack engine and replacing with a
I am switching out a 2005 Mack engine and replacing with a 2007 Mack engine. Everything hook up except a connector bracketed to engine--seems as if it is from ECU-- 2005 is round (15 wire) connector a… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,195 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Daniel Wilson

Daniel Wilson

6,195 satisfied customers

Owner at DJ Wilson

Cat Man

Cat Man

Cat Engine Expert

5,353 satisfied customers

I am ASE Master Truck Certified.

Wayne

Wayne

Journeyman

5,115 satisfied customers

worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Jeremy

Jeremy

Certified Truck/Bus Technician

2,756 satisfied customers

ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, Network Engineer specializing in CAN faults, Aftertertreatment, and vehicle communications

Curtis B.

Curtis B.

Technician

1,947 satisfied customers

Technician turned service manager on multiple lines of trucks and engines, used in industry.

cumminsdr

cumminsdr

Mechanic

1,886 satisfied customers

All types of Cummins applications

Chris (aka-Moose)

Chris (aka-Moose)

Technician

641 satisfied customers

24 years of experience diagnosing & repairing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x