Mazda

Mazda repair questions? Ask mechanics for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Mazda Questions
Did a head job on the 2.0 mazda protege 5 while cranking
ok so did a head job on the 2.0 mazda protege 5 while cranking have to push throttle half way and it will start but very poorly did water pump and timing.and even floored will die … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
1,234 satisfied customers
1998 b2500 2.5. Truck was running fine. Parked it an hour
1998 b2500 2.5. Truck was running fine . Parked it an hour later cranked it backed out of driveway and had to hold peddle halfway to floor to move barely made it to store and back. Replaced MAF as I h… read more
Gabriel Grey
Gabriel Grey
ASE Certified Master Technician
Associates
1,224 satisfied customers
Have a 1992 Mazda Miata was idling rough took to mechanic
Have a 1992 Mazda Miata was idling rough took to mechanic and he did cylinder test. Cylinder 1, 2, and 4 had 150-160psi. Cylinder number 3 had 60 PSI. I am being told I need a new motor? And my car is… read more
Richard Greer
Richard Greer
Online Automotive Repair Consultant
Vocational, Technical or Trade School
1,269 satisfied customers
My son had a 2008 Mazda 3 130,000 miles. Car always drives
My son had a 2008 Mazda 3 130,000 miles. Car always drives nice. He was coming home from school the other night on the highway and lost all power and car died. He called me and I was thinking overheat… read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
42,257 satisfied customers
1998 Mazda b2500. Had a running problem, had a shop do a
1998 Mazda b2500. Had a running problem, had a shop do a compression test. Zero compression on cylinder 2 and low on rest of cylinders. Pulled the head thinking a burned valve. All look in good shape.… read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
42,257 satisfied customers
I need some info and advice, 2007 mazda 3 2.3l non turbo, i
i rebuilt the engine due to oil starvation...i replaced the crankshaft and new main bearings...also had cylinder head machined...so i got the engine back together and back in the car...started right up but made this chattering sound at idle and reving it up...i thought is was vvt solenoid and actuator as i sounded like it was coming from there..i replaced both...but as i turn the crankshaft and timing chain by hand i here a clicking sound coming from the new vvt actuator...is it suppose to that or does it due it due to no oil been insdie the actuator yet? … read more
Dan
Dan
Dealership Technician
Associate Degree
2,610 satisfied customers
Mazda B2200: Poor acceleration: press on throttle without load
Poor acceleration: press on throttle without load and engine responds well, but with load engine puts (put put put) some. Struggles going up hills. Minimal to no problems accelerating going down hill.… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
23,437 satisfied customers
Mazda m6: I got compression on 2 cylinders weak on the other
I got compression on 2 cylinders weak on the other 2 on my 2.3 Mazda engine it's 08 Mazda 6 150000 miles what could be the problem… read more
EricFromCT
EricFromCT
Auto Technician
6,200 satisfied customers
mazda B3000: I have a mazda B3000 truck. The codes read lean
I have a mazda B3000 truck. The codes read lean right and left banks. In addition water is coming out of the exhaust pipe. I haven't ran a compression check yet. Does it sound like heads or head gaske… read more
Juan Crespo
Juan Crespo
Sr. Technician
Bachelor's Degree
1,262 satisfied customers
Mazda Protege: 1999 Mazda Protege. RAn fine then would not
1999 Mazda Protege. RAn fine then would not start in the morning. Cranks over fine and intermittently fires. Replaced fuel pump and it crank for 2 seconds then ran for about 5 seconds. Now does the sa… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
1,234 satisfied customers
white exhaust and less power when driving my mazda 626 from
white exhaust and less power when driving my mazda 626 from 1998. 2litre engine. What can it be? And which parts in the engine has to be changed to make it work properly? I know it might be an coolant… read more
Ross
Ross
Automotive Technician/Electrician
Vocational, Technical or Trade Scho
740 satisfied customers
Mazda B2000: 93 Mazda B2000 2.2 has blue smoke concern on satrt-up.
93 Mazda B2000 2.2 has blue smoke concern on satrt-up. Cylinder head has been reworked with new oil seals. Customer states head has been reworked once, oil seals have been replaced twice. What do you … read more
Mike Kelly
Mike Kelly
Auto Mechanic
Vocational, Technical or Trade Scho
2,509 satisfied customers
My local Mazda service manager says that my manual 5 speed
My local Mazda service manager says that my manual 5 speed 2006 Mazda 3- 2.0 engine (133,000 miles) has no compression and recommends replacing the engine to save labor costs. He said that the probabl… read more
HondaPlatinum
HondaPlatinum
Vocational, Technical or Trade School
27,024 satisfied customers
1986 mazda b2000: EGR..), cap, rotor, fuel filter..Idles..coolant
1986 mazda b2000 64K miles, 5 sp manual Done so far: new cat, EGR, plugs (gap double checked), cap, rotor, fuel filter, carb, fuel pump, timing at 6 deg, air filter, airbox and reed valves clear, Idle… read more
Drew
Drew
Senior Mazda Tech.
Vocational, Technical or Trade Scho
2,515 satisfied customers
1993 mazda 626 dx: normal idle and stalls on acceleration..timing belt
1993 mazda 626 dx had family members replacing head gasket now wont idle at normal idle and stalls on acceleration .they also put all new seals water pump timing belt… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
14,218 satisfied customers
1984 Mazda B2000: pickup..head gasket..the timing chain was..block
I have a 1984 Mazda B2000 pickup. I recently remanufactured the head to replace the head gasket. Obviously, the timing chain was loose in the block for a time. When I reinstalled the cam drive sprocke… read more
Greg
Greg
Shop owner, technician
Vocational, Technical or Trade Scho
7,394 satisfied customers
1986 mazda b2000: head gasket..a electrical schematic or a door handle
hi john im coz last fri i i asked for step by step ins on how to replace a head gasket for a 1986 mazda b2000 i got some inst but each time i click on full size image i get a different part of the veh… read more
Drew
Drew
Senior Mazda Tech.
Vocational, Technical or Trade Scho
2,515 satisfied customers
I have a 96 2.0 186K miles..cylinder..piston..smokes
I have a 96 2.0 186K miles. #3 cylinder has oil on top of piston everytime I check it. It does burn off eventual after warm up, but smokes bad every start up. I replaced all valve oil seals, but had l… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Chris (aka- Moose)

Chris (aka- Moose)

Technician

1,234 satisfied customers

24 years of experience diagnosing & repairing

mazdamaster577

mazdamaster577

Master Technician

691 satisfied customers

mazda master/shop foreman for 15 years.

George H.

George H.

ASE Certified Technician

462 satisfied customers

15+Years

Mazda Ed

Mazda Ed

ASE Certified Technician

268 satisfied customers

ASE Certified Mazda Master Technician

Tim Mohr

Tim Mohr

ase master

252 satisfied customers

30 yrs experience in Foriegn and Domestic, Gas and Diesel

Paul M ASE Master

Paul M ASE Master

ASE Master Tech

132 satisfied customers

ASE Master Tech 20+ Years

BigBob

BigBob

Service manager/Technician

93 satisfied customers

25 years in the auto repair business

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x