Mazda

Mazda repair questions? Ask mechanics for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Mazda Questions
Ron Today I'm going to change the front hub/bearing assembly
Ron Today I'm going to change the front hub/bearing assembly and the manual lock out hub on a 4x4 F-250 single rear wheel . Can you send me the shop instructions for that work. My repair manual isn't … read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
Ron, I misplaced my Chiltons and need torque specs for f250
Ron, I misplaced my Chiltons and need torque specs for f250 super duty 5.4 transmission pan to transmission and tightening sequence if other than star… read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
2002 F 250 Automatic transmission Nephew says he doesn't
2002 F 250 Automatic transmission Nephew says he doesn't think it shifts to 4th or whatever is the highest, when the truck gets up over 50 mph. I took it out on the highway yesterday and it's very sub… read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
Ron, My brother insists that this ford part # is for the
Ron, My brother insists that this ford part # is for the front hub assembly on our 2002 F-250 super duty. I'm not quite so sure as crossing to NAPA . 5.4 L V-8 . It's white with some rust.1c3z3b396DA … read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
Ron What are the front brake torque specs of a 2011 Dodge
Ron What are the front brake torque specs of a 2011 Dodge Avenger 2.4 Mounting bracket to knuckle and caliper to mounting bracket. brake line to caliper reservoir… read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
Ron, 2011 Dodge Avenger Base. The other night nephew was
Ron, 2011 Dodge Avenger Base. The other night nephew was driving and had the battery light come on a couple times. Then all the dash lights came on the air shut off and the motor wouldn't shift out of… read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
Ron, My nephew's 2002 F-250 super duty, 5.4 V8 has a cruise
Ron, My nephew's 2002 F-250 super duty, 5.4 V8 has a cruise control problem. When the cruise is turned on the light comes on, but when the speed is set it goes off consequently there is no cruise. Wha… read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
Ron, Any reason hub bearings would go bad after 2 months?
Ron, Any reason hub bearings would go bad after 2 months? I'm working on a 2003 Ford Ranger. In April I replaced the front brakes complete. Hubs, bearings inner and outer, rotor/hub pads and calipers.… read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
Ron, I'm working with an F-350 6.0L 363CID V8 Diesel Super
Ron, good morning. I'm working with an F-350 6.0L 363CID V8 Diesel Super Duty. Last night my nephews check engine and abs lights came on. His brake reservoir was empty. Naturally I had him fill it. At… read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
39,544 satisfied customers
Trying to figure out this Escort that goes left and grinds
Hey Ron, Trying to figure out this Escort that goes left and grinds when breaking at moderate speed. The caliper pushed back real easy. I've attached a couple pictures for you to look at and maybe tha… read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
2006 Tribute AWD I thought I had a Caliper freeze up but
2006 Tribute AWD I thought I had a Caliper freeze up but when I changed it neither rear wheel will turn the car is on jack stands any idea what might be the cause … read more
Richard Greer
Richard Greer
Online Automotive Repair Consultant
Vocational, Technical or Trade School
1,193 satisfied customers
Ron, No good deed goes unpunished, right? 2012 Dodge avenger
Ron, No good deed goes unpunished, right? 2012 Dodge avenger se all I was trying to do was change the battery. 1 wheel nut was missing should have stopped there. oh no couldn't No I'm to the point I h… read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
Ron, I have a broken spring on the passenger side rear at
Ron, I have a broken spring on the passenger side rear at the base. My guess would be that's what has been causing the clunk in the rear on my 2002 Focus. If I borrow the compression tool from NAPA wh… read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
F-250 super duty rattle. I think I found the rattle culprit.
F-250 super duty rattle. I think I found the rattle culprit. The steering stabilizer ball joints are looser than Maggie's drawers flapping in the wind. What issues will I have replacing it or is it pr… read more
Ron Z.
Ron Z.
- Mazda Tech -
Vocational, Technical or Trade Scho
21,699 satisfied customers
I have a 2002 mazda protege and it appears as if the brake
I have a 2002 mazda protege and it appears as if the brake pads are bad. They were replace less than 30,000 miles ago with NAPA mid-grade I do believe. I'm not sure if the calipers were changed at the… read more
Canadafix
Canadafix
Auto shop owner
Vocational, Technical or Trade Scho
1,507 satisfied customers
I have a 97 mazda protege, standard 5 speed and the clutch pedal is real easy to push abou
I have a 97 mazda protege, standard 5 speed and the clutch pedal is real easy to push about 2/3s of the way down and then it gets much harder to push the rest of the 1/3 way down. I'm thinking this me… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
13,349 satisfied customers
1997 Miata: engaged..which resulted in some grinding of the gears
1997 Miata, kid's. I engaged the clutch, stepped on the gas and the car took off with the clutch all the way to the floor. Also, I could not get it into gear at several stoplights and tried to force i… read more
Jerry
Jerry
Service consultant
Vocational, Technical or Trade Scho
13,108 satisfied customers
1996 Mazda B4000 4x4: automatic hubs..test drive..wheel jerks
My question is concerning a 1996 Mazda B4000 4x4 not a Ford, but they I believe thay are very similar. I recently had the automatic hubs on my 96 Mazda replaced by the dealer. After he finished I took… read more
Wrenchin
Wrenchin
Automotive Technician
Vocational, Technical or Trade Scho
4 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Drew

Drew

Super Mazda Tech.

2,188 satisfied customers

19 yrs. experience. Mazda Senior Certified Tech, with Ford, Linc. & Merc. experience. ASE L1 Advanced Certified Master Tech.

Chris (aka- Moose)

Chris (aka- Moose)

Technician

1,073 satisfied customers

16 years of experience

mazdamaster577

mazdamaster577

Master Technician

691 satisfied customers

mazda master/shop foreman for 15 years.

George H.

George H.

ASE Certified Technician

462 satisfied customers

15+Years

Mike Kelly

Mike Kelly

Mazda Mechanic

273 satisfied customers

17 years experience as an auto mechanic, foreign and domestic. 5 years running my own repair business.

Mazda Ed

Mazda Ed

ASE Certified Technician

268 satisfied customers

ASE Certified Mazda Master Technician

Tim Mohr

Tim Mohr

ase master

247 satisfied customers

30 yrs experience in Foriegn and Domestic, Gas and Diesel

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x