Mazda

Mazda repair questions? Ask mechanics for answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Mazda Questions
I have a 2003 mazda6 2.3l, on a cold engine it runs fine but
I have a 2003 mazda6 2.3l, on a cold engine it runs fine but after it heats up the idle is bad "lopey" and dies. Car runs fine down the road. I have cleaned the carbon from the throttle body, new mass… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
10,909 satisfied customers
Mazdv6 has misfire on cylinder 4 ,new spark plugs ,wire,
Mazd(###) ###-####v6 has misfire on cylinder 4 ,new spark plugs ,wire, catylitic converter ,and error code p0400 p0401 p0174 it is ok ,but it get hot misfire happened and engine light blinks I cleaned… read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
37,603 satisfied customers
Mazda 3 S: I have a 2006 mazda 3 s. 2.3. When i come to a stop
I have a 2006 mazda 3 s. 2.3. When i come to a stop sometimes I have no accelerator. Push the pedal and nothing happens. The motor just stay at 2000 rpms. I shut the car off and turn it back on I have… read more
BOBBYSS
BOBBYSS
Automotive Repair/Damage Investigator
Associate Degree
14,589 satisfied customers
2003 mazda 6: cold start..car the rpm..throttle body..possible hose
I have a 2003 mazda 6i 2.3L and been having an issue with my car on a cold start. Everytime I start the car the rpm's go crazy 1000 to 5000 for about 5 minutes,feels like the car is being reved up but… read more
normanahoyt
normanahoyt
Owner/technician/manager
Bachelor's Degree
367 satisfied customers
2003 Mazda Tribute: is accelerating and I have a hard time slowing
My 4 cylinder manual transmission 2003 Mazda Tribute is accelerating and I have a hard time slowing it down even in residential areas when the car is in first and second gear and when I am turning or … read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
Mazda 626: Have changed the Idle control valve, plugs and wires
Im on my way to work so will check this afternoon. The Mazda 626 will not idle at all now. Have changed the Idle control valve, plugs and wires. Any new ideas? 98 Mazda 626 4 cylinder.… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
2003 mazda 6: push..u let off the peddle it will die
i have a 2003 mazda 6 it will not ideal. if u push the peddle a little and hold it will ideal fine.but if u let off the peddle it will die. it will run and drive fine as long u hold your foot on the g… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
2000 mazda 626: 4cyl..car runs great..surge..die..wires oxygen sensors
Got a 2000 mazda 626 4cyl car runs great if your on the gas going car tends to surge or just die when at an idle or on a slope. Where to start first? I have replaced wires oxygen sensors and ran fuel … read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
1992 mazda protege lx: car started surging at idle..driven..20 minutes
hello, i have a 1992 mazda protege LX 1.8L DOHC. i have a problem going on for about a week now. the car started surging at idle and while driving usually when driven for about 20 minutes or so. a lot… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
2003 Mazda 6: cyl..p0171..to take it to a local mechanic...idles rough
My daughters 2003 Mazda 6 (6 cyl) starting giving a P0171 and P0174 System to Lean Bank 1 and Bank 2. The car is in Ft Lauderdale, 200 miles from where I live so I can not check it. She will have to t… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
98 Mazda B4000: 4WD..4.0L..the MAF sensor with a cleaner
I have a 98 Mazda B4000 4WD 4.0L truck that continues to have problems with the error codes P0171 and P0174: Lean Bank 1 and Lean Bank 2. I used to spray the MAF sensor with a cleaner and the errors w… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
Mazda miata I took the Miata to a Mazda dealer because the
I took the Miata to a Mazda dealer because the idle is fluictuating a great deal. While driving, or running in park everything seems ok. But when stopped with the car in drive the idle drops way down … read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
1991 Mazda 626 DX: with a 2.2 liter fi 4 cyl..car idles rough.
I have a 1991 Mazda 626 DX with a 2.2 liter FI 4 cyl. The car idles rough. Only 97000 miles. Seems like electrical things effect it. Changing the fan speed puts it under a load. Turn on emergency flas… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
2000 Mazda 626: cylinder..I think he messed up the throttle control
I have a 2000 Mazda 626-6 cylinder. I had some work done on it by a mechanic who was not the best but all I could afford at the time. I think he messed up the throttle control. When I start car it goe… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
2003 mazda mpv: 500 miles..the over drive light comes..hesitates
I have a 2003 mazda mpv with 33,500 miles. the over drive light comes on and will not go off when we press the button on the end of the gear shift.the car hesitates a little when the light is on.they … read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
97 Mazda B4000: V6..automatic...5K to 1k rpm at street lights..stalls
'97 Mazda B4000 4.0 V6 pickup, automatic; after start-up and short warm-up in winter weather engine oscilates from .5K to 1K RPM at street lights and eventually stalls. I follow up with - transmission… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
I have a 94 Mazda B2300, 4 cylinder manual trans truck. I
I have a '94 Mazda B2300, 4 cylinder manual trans truck. I am having this issue with a racing engine when shifting from gear to gear then it will back off. This is an intermittent problem and it seems… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
19,587 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Drew

Drew

Super Mazda Tech.

2,188 satisfied customers

19 yrs. experience. Mazda Senior Certified Tech, with Ford, Linc. & Merc. experience. ASE L1 Advanced Certified Master Tech.

Chris (aka- Moose)

Chris (aka- Moose)

Technician

929 satisfied customers

16 years of experience

mazdamaster577

mazdamaster577

Master Technician

691 satisfied customers

mazda master/shop foreman for 15 years.

George H.

George H.

ASE Certified Technician

459 satisfied customers

15+Years

Ron Z.

Ron Z.

- Mazda Tech -

425 satisfied customers

18+yrs experience. State Inspector and Mazda Diagnostics

Mike Kelly

Mike Kelly

Mazda Mechanic

273 satisfied customers

17 years experience as an auto mechanic, foreign and domestic. 5 years running my own repair business.

Mazda Ed

Mazda Ed

ASE Certified Technician

264 satisfied customers

ASE Certified Mazda Master Technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x