Mazda

Mazda repair questions? Ask mechanics for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Mazda Questions
Trying to remove rocker arms on an 87 b2000. Everything is
Trying to remove rocker arms on an 87 b2000. Everything is loose but the front cap assy behind the timing gear won't come off. I'm just trying to do valve stem seals with the least amount of disassemb… read more
George H.
George H.
ASE Certified Technician
Associate Degree
459 satisfied customers
2008 Mazda CX-7 2.3L turbo /Replaced valve cover gaskets &
2008 Mazda CX-7 2.3L turbo /Replaced valve cover gaskets & valve cover is in place/valve cover bolts with limiter sleeve are used/Need know torque specification OR know if bolts are simply torqued unt… read more
Roy
Roy
shop foreman
Associate Degree
4,599 satisfied customers
My problem is I did not the old actuator and now how I'm
my problem is I did not mark the old actuator and now how I'm going to install the new one???i did replace the timing chain because was making a rattle noise, found actuator foiling a part like I said… read more
Juan Crespo
Juan Crespo
Sr. Technician
Bachelor's Degree
1,262 satisfied customers
Having trouble unscrewing the crankshaft pully bolt. I am
Having trouble unscrewing the crankshaft pully bolt. I am trying to turn it counter clockwise and have a big cheater bar on it but it will not budge. am I turning it the wrong way?… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
12,813 satisfied customers
OK got the CV joint out, got all things hooked up and when
OK got the CV joint out, got all things hooked up and when turned the key, lock up! Found I did not seat torque converter properly, so can you tell me how to make sure it is, could not get the double … read more
Eric
Eric
Retired
N/A
33,956 satisfied customers
Mazda MPV LX: i have a mazda mpv 2004when i turn on the engina(very
i have a mazda mpv 2004 when i turn on the engina(very har i have to press gas a deep) and i have to turn the shif from park to drive, the engine turn off, if the engine is warm or hot i dont have a p… read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
30,680 satisfied customers
Mazda 3: Replacing the auto trans in a Mazda 3. I have the
Replacing the auto trans in a Mazda 3. I have the torque converter bolted to the flywheel and I want to make sure it's in place on the trans end. Shouldn't I be able to turn the flywheel one I start t… read more
George H.
George H.
ASE Certified Technician
Associate Degree
459 satisfied customers
how do you remove torque converter bolts from 4 cyl 01 mazda
how do you remove torque converter bolts from 4 cyl 01 mazda B2300? Do you have to drop the oil pan?… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
12,813 satisfied customers
Mazda 626 LX: 2001 Mazda 626 Automatic transmission replacement.
2001 Mazda 626 Automatic transmission replacement. I put the replacement transmission in, and the engine wont crank. I hear the starter try to turn, but it doesn't. So I loosened all of the trans to e… read more
Don Knight
Don Knight
Shop Manager/Technican
Associate Degree
1,471 satisfied customers
1997 Mazda 626: removing and replacing the automatic transmission
1997 Mazda 626 4cyl automatic transmission, Does anyone have step by step instructrions for removing and replacing the automatic transmission?… read more
Mike Kelly
Mike Kelly
Mazda Mechanic
Vocational, Technical or Trade Scho
273 satisfied customers
1999 Mazda Protege LX: seat belt latch is broken on my drivers seat.
1999 Mazda Protege LX. The seat belt latch is broken on my driver's seat. I ordered the part through the Mazda dealer. Tried to remove the seat, but cannot get the bolt to budge using six point socket… read more
George H.
George H.
ASE Certified Technician
Associate Degree
459 satisfied customers
2003 Mazda MPV ES: w/ a 3.0L V6 engine & auto tranny..van..slipping
Hello; I have a 2003 Mazda MPV ES, w/ a 3.0L V6 engine & auto tranny. Nowadays, when I stop at a traffic light, the van pulsates forward, feels like something is slipping down there somewhere. If I di… read more
Stephen D
Stephen D
647 satisfied customers
2006 Speed 6 manual transmission awd turbo charged.
2006 Speed 6 manual transmission awd turbo charged. step by step how to remove and replace the "down pipe" and do I need any special tools or wrench styles to do the job… read more
Drew
Drew
Super Mazda Tech.
Vocational, Technical or Trade Scho
2,188 satisfied customers
98 mazda mpv: the alternator, bottom bolt..power steering..pulley
have a 98 mazda mpv, need to replace the alternator, bottom bolt will not clear the power steering belt pulley. how do i get around this?… read more
Mazda Ed
Mazda Ed
ASE Certified Technician
High School or GED
264 satisfied customers
95 Mazda 626: tranny..the torque converter bolts..engine mount
I'm swapping an auto tranny in a 95 Mazda 626. Everything is pretty straight forward except access to the torque converter bolts and the rear engine mount. How do you access the torque converter bolts… read more
Drew
Drew
Super Mazda Tech.
Vocational, Technical or Trade Scho
2,188 satisfied customers
1993 protege: a trans leak in the front by the torque converter..bolts
i have a 1993 protege, i have a trans leak in the front by the torque converter. i removed the trans and now am wondering how to remove piece bolted behind torque converter. i removed the bolts but it… read more
Greg
Greg
Shop owner, technician
Vocational, Technical or Trade Scho
5,876 satisfied customers
1999 b3000: automatic..torque converter..onto shaft..dipstick
I just bought a 1999 b3000 3.0l automatic truck for $200, put a junk yard motor and transmission in it, both came out of the same truck, i have a bad grinding sound coming from around torque converter… read more
Drew
Drew
Super Mazda Tech.
Vocational, Technical or Trade Scho
2,188 satisfied customers
2000 mazda 626: cyl..motor 2 tranny the torque converter studs..2 bolt
hi how r u, i have a 2000 mazda 626 4 cyl. when i line up motor 2 tranny the torque converter studs barely pass through the fly wheel 2 bolt up. when i put each torque conv nut on and tighten it seems… read more
Tom N.
Tom N.
Senior Tec
Associate Degree
294 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Drew

Drew

Super Mazda Tech.

2,188 satisfied customers

19 yrs. experience. Mazda Senior Certified Tech, with Ford, Linc. & Merc. experience. ASE L1 Advanced Certified Master Tech.

Chris (aka- Moose)

Chris (aka- Moose)

Technician

929 satisfied customers

16 years of experience

mazdamaster577

mazdamaster577

Master Technician

691 satisfied customers

mazda master/shop foreman for 15 years.

George H.

George H.

ASE Certified Technician

459 satisfied customers

15+Years

Ron Z.

Ron Z.

- Mazda Tech -

425 satisfied customers

18+yrs experience. State Inspector and Mazda Diagnostics

Mike Kelly

Mike Kelly

Mazda Mechanic

273 satisfied customers

17 years experience as an auto mechanic, foreign and domestic. 5 years running my own repair business.

Mazda Ed

Mazda Ed

ASE Certified Technician

264 satisfied customers

ASE Certified Mazda Master Technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x