How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg
Greg, import technician
Category: Mazda
Satisfied Customers: 7129
Experience:  17 years shop owner import
29331485
Type Your Mazda Question Here...
Greg is online now
A new question is answered every 9 seconds

Is there any way to get my serial # for my immobilizer with

Customer Question

Hi is there any way to get my serial # for my immobilizer with vin# ***** have T300+ programmer but need seria #l of immobilizer to get pin code
JA: Do you have a scan tool to read the codes?
Customer: to read vehicle codes
JA: What is the model/year of your Mazda?
Customer: 2008 mazda 3 vin#
JA: Are you fixing your Mazda2 yourself? What have you tried so far?
Customer: yes removed a remote start from car now I have immobilizer flashing rapidly no crank on engine
JA: Anything else you want the mechanic to know before I connect you?
Customer: just if i will be able to reprogram myself
Submitted: 9 months ago.
Category: Mazda
Customer: replied 9 months ago.
vin JM1BK32F381833481 2008 mazda 3
Expert:  Greg replied 9 months ago.

Hi, I'm Greg (Indy-Tech).
Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply ASAP.
Rgds Greg.

Expert:  Greg replied 9 months ago.

Hi .

Go to this website and here you can get the code for your car and any others you may need in the future .

Please click here

Due to laws rules and regulations i can not give out this information sorry .

Need further assistance with this issue then please get back to me with the reply box below .
After rating there is no further cost for any other question relating this issue .
Kind regards Greg

Customer: replied 9 months ago.
Can you tell me is the immobilizer part of Instrument cluster or separate box
Expert:  Greg replied 9 months ago.

On the immo is the ser number that you need .

they don't all have the same ,

Greg

Customer: replied 9 months ago.
ser# ***** with that my programmer can reprogram unit and keys
Expert:  Greg replied 9 months ago.

You will need to locate the immo module the number is ***** the module .

Greg

Customer: replied 9 months ago.
but no idea if my year it is in the IC or separate box and it's location in vehicle that's my problem
Expert:  Greg replied 9 months ago.

okay just checking .this did change on the newer models .

Be right back .

Greg

Expert:  Greg replied 9 months ago.

Okay just checked from your year .you will need the M-MDS tool as the outcode changes every 5 ignition turns

so with this system there is no code as such.

the M-NDS reads the outcode the outcode is decoded and a new incode is given for the incode programming then the system is reprogrammed .

The security access OUTCODE is read by the tool )M-MDA)and a incode is given.

Greg

Customer: replied 9 months ago.
Ok thanks
Expert:  Greg replied 9 months ago.

Thank you .

Need anything else concerning this issue please get back to me .

Kind regards Greg