How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg, import technician
Category: Mazda
Satisfied Customers: 7057
Experience:  17 years shop owner import
Type Your Mazda Question Here...
Greg is online now
A new question is answered every 9 seconds

2006 Mazda 6 3.0 replacing engine. Friends tell me I can use

Customer Question

2006 Mazda 6 3.0 replacing engine. Friends tell me I can use 2003 to 2007 ford fuision engine. Changing the brackets is that true
Submitted: 10 months ago.
Category: Mazda
Expert:  Greg replied 10 months ago.

Hi, I'm Greg (Indy-Tech).
Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply ASAP.
Rgds Greg.

Expert:  Greg replied 10 months ago.

If you have the same engine years then yes this is possible .

BUT the following parts have to be swapped over .

The timing cover,

Oil pan,

Fuel rail and oil pick up tube.

And other parts and sensors .

You will in most cases just have to swap over parts so you can use the original wiring harness and sensors see which ones you have to change .

Depending on the year the oil pan may be the same .?

But it will be the same .just have to make sure you check well what parts have to be swaped over .

Please get back to me with the reply box if you need further assistance with this issue .

Kind regards Greg