How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask peterpete190 Your Own Question
peterpete190, Auto Technician
Category: Mazda
Satisfied Customers: 29096
Experience:  Auto repair Technician with 17 years experience.Past ASE and other certifications.
Type Your Mazda Question Here...
peterpete190 is online now
A new question is answered every 9 seconds

Mazda 6 S: Mazda 6 headlights low beam not working

Customer Question

Mazda 6 headlights low beam not working
Submitted: 1 year ago.
Category: Mazda
Expert:  peterpete190 replied 1 year ago.
Hi my name is ***** ***** I will be happy to assist with this today.In some cases I may need more info to assist better.I apologize for any delay. Has anything been checked/tested for this issue here at all? Let me know,thanks Pete
Customer: replied 1 year ago.
Expert:  peterpete190 replied 1 year ago.
O.k.,the first thing that needs done here is to check the low beam bulbs to see if both bulbs had burned out.This can occur in some cases at the same time. If the bulbs are o.k. this can be an issue with the head light low relay located in your main fuse panel or the dimmer switch that selects between low and high beam when engaged.I have seen both of these fail before in the past needing replaced.This will have to be tested further to locate which is the cause here and then from there replaced.This will require a multi meter to do the electrical testing to locate which is at fault here. If more help is needed, use the reply tab to continue our conversation. If no further assistance is needed, kindly rate my service.You can rate at any time and we can continue to work on your question as this will not close out your question.Keep in mind in some cases it can be difficult to fully diagnose or help repair your vehicle without seeing it and I work on delivering the best possible answer from what I see to work with.Thanks Pete