Mazda

Mazda repair questions? Ask mechanics for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Mazda Questions
I have a 2008 Mazda 6 with a 2.3liter 4 cyl engine.
I have a 2008 Mazda 6 with a 2.3liter 4 cyl engine. Automatic tranny. I have code p2187 and also p0301 or p0303 intermittently comes on after I replaced the fuel pump and cleaned mass air flow sensor … read more
Ricardo Hohl
Ricardo Hohl
Auto Motive Instructor
Automotive tech
4,320 satisfied customers
2007 Mazda CX-7 is there a trick to removing the PCV valve?
2007 Mazda CX-7 is there a trick to removing the PCV valve? I see it right in front of the engine but is there a trick or just pull on it and wiggle? Thanks… read more
Ron
Ron
Automotive Tech
Vocational, Technical or Trade Scho
37,761 satisfied customers
2 weeks ago I installed brand new turbo in my Mazda CX-7,
Hi my name is ***** ***** 2 weeks ago I installed brand new turbo in my Mazda CX-7 , and now I have oil in all air houses and intercooler , I don't know what goes wrong please help me, and what I shou… read more
Dan
Dan
Dealership Technician
Associate Degree
2,212 satisfied customers
My name is ***** *****. I am having a very hard time finding
My name is ***** *****. I am having a very hard time finding out how to remove the intake manifold from the mazda 3 2.5L I see 3 bolts holding it on and that is it when my book said there are 7 or 8 t… read more
EricFromCT
EricFromCT
Auto Technician
4,596 satisfied customers
I have a 2004 Mazda MPV. Has 230,000 km on it. It was
I have a 2004 Mazda MPV. Has 230,000 km on it. It was throwing code P0301, being misfire on #1 cylinder. I have had front coil problems in the past, and symptoms were similar--rough running especially… read more
Clayso
Clayso
Shop Owner Master Technician
ASE Master Certified Automobile Technician
879 satisfied customers
I have a 2003 mazda6 2.3l, on a cold engine it runs fine but
I have a 2003 mazda6 2.3l, on a cold engine it runs fine but after it heats up the idle is bad "lopey" and dies. Car runs fine down the road. I have cleaned the carbon from the throttle body, new mass… read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
10,980 satisfied customers
Mazda 6: Looking procedure and labor hours to replace
Looking for a procedure and labor hours to replace the PCV hose under the intake manifold on an 05 Mazda 6… read more
Jerry
Jerry
Service consultant
Vocational, Technical or Trade Scho
13,107 satisfied customers
Mazda 3: Mazda: I have a 2004 mazda 3, the oil was overfilled
Mazda: I have a 2004 mazda 3, the oil was overfilled by quite a bit and i think i blew something in the top of the engine. it idles fine but burns oil over 2000 rpms… read more
Greg
Greg
Shop owner, technician
Vocational, Technical or Trade Scho
5,874 satisfied customers
mazda 6: I am working on a 2008 mazda 6 with a 2.3 vin c engine.
I am working on a 2008 mazda 6 with a 2.3 vin c engine. the short term fuel trim goes to 25 the instant that the pcm goes into closed loop. I have blocked off the evap puge solenoid and brake booster … read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
27,884 satisfied customers
mazda 6: I am working on a 2008 mazda 6 with a 2.3 vin c engine.
I am working on a 2008 mazda 6 with a 2.3 vin c engine. Short term fuel trims are at 25 all the time, i have checked and replaced the pcv hose, blocked off the evap purge solenoid, replaced intake man… read more
HondaPlatinum
HondaPlatinum
Vocational, Technical or Trade School
25,572 satisfied customers
2005 Mazda 6: with a 2.3 liter engine, intermittently wants to lunge
My 2005 Mazda 6 with a 2.3 liter engine, intermittently wants to lunge forward when foot is on brake and rolling to a stop.… read more
Drew
Drew
Super Mazda Tech.
Vocational, Technical or Trade Scho
2,188 satisfied customers
rpm surging when warmed up,2500 to 2800rpm .if..nuetral..tb and MAP
rpm surging when warmed up,2500 to 2800rpm .if i come to a full stop and put in nuetral it idle's good when it is cold it is ok. cleaned TB and MAP the proplem is getting worse over 3 days it first st… read more
Drew
Drew
Super Mazda Tech.
Vocational, Technical or Trade Scho
2,188 satisfied customers
mazda 3 S 2004 mazda 2.3 s with a consistent knocking noise
2004 mazda 2.3 s with a consistent knocking noise that my mechanic is convinced is from the timing chain area. So we have replaced the timing chain, tensioners, etc. and still have the same loud ticki… read more
Drew
Drew
Super Mazda Tech.
Vocational, Technical or Trade Scho
2,188 satisfied customers
2006 Mazda 3: gearbox..000 miles..oil, about a quart every 500 miles
I have a 2006 Mazda 3 with the 2.3 engine and manual gearbox. The car has 60,000 miles and has suddenly started consuming a lot of oil, about a quart every 500 miles. There are no leaks and no smokesc… read more
Drew
Drew
Super Mazda Tech.
Vocational, Technical or Trade Scho
2,188 satisfied customers
2003 mazda: a little jerking problem averytime the a/c is on
i have a 2003 mazda6 3.0 having a little jerking problem averytime the a/c is on. car has good pwr but continues to jerk around when a/c is on,and makes the rpm jump between 750 and1150rpm when idlein… read more
Alex
Alex
Automotive Technician
Associate Degree
1,153 satisfied customers
2005 Mazda RX 8: 000 miles..the radiator light..vibrates..idling
I have a 2005 Mazda RX 8 about 60,000 miles. For the last 2 years the radiator light has been coming on when it gets to 4rpm's. Its a little rough to start and vibrates more than normal when idling. I… read more
Drew
Drew
Super Mazda Tech.
Vocational, Technical or Trade Scho
2,188 satisfied customers
2004 Mazda 3: coolant hose..leaking..Need o know how many bolts hold
I have a 2004 Mazda 3 2.3 L. The coolant hose (Need the name to order the new one) behind the intake manifold is leaking. Need o know how many bolts hold on the intake manifold. What are the torque sp… read more
Tim Mohr
Tim Mohr
SHOP OWNER
Master's Degree
16,261 satisfied customers
2003 Mazda 6: the car idles rough with the RPMs going..car runs
I have a 2003 Mazda 6 with a 2.3. When the engine is cold the car idles rough with the RPMs going up & down. You can hear alot of air coming from the front of engine but when the car warms up, after a… read more
Drew
Drew
Super Mazda Tech.
Vocational, Technical or Trade Scho
2,188 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Drew

Drew

Super Mazda Tech.

2,188 satisfied customers

19 yrs. experience. Mazda Senior Certified Tech, with Ford, Linc. & Merc. experience. ASE L1 Advanced Certified Master Tech.

Chris (aka- Moose)

Chris (aka- Moose)

Technician

929 satisfied customers

16 years of experience

mazdamaster577

mazdamaster577

Master Technician

691 satisfied customers

mazda master/shop foreman for 15 years.

George H.

George H.

ASE Certified Technician

459 satisfied customers

15+Years

Ron Z.

Ron Z.

- Mazda Tech -

425 satisfied customers

18+yrs experience. State Inspector and Mazda Diagnostics

Mike Kelly

Mike Kelly

Mazda Mechanic

273 satisfied customers

17 years experience as an auto mechanic, foreign and domestic. 5 years running my own repair business.

Mazda Ed

Mazda Ed

ASE Certified Technician

264 satisfied customers

ASE Certified Mazda Master Technician

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x