How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Mazda
Satisfied Customers: 47969
Experience:  16 years of experience
Type Your Mazda Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

I have a 2008 mazda 5 and it wont start power is good I got

Customer Question

I have a 2008 mazda 5 and it wont start power is good I got 2 codes back from the diagnostic mach. U0100 its something about not being able to communicate and the other was not a number but I/M monitor or throttle position or something like that
Submitted: 1 year ago.
Category: Mazda
Expert:  Chris (aka- Moose) replied 1 year ago.

Welcome, I'm Chris (aka Moose) I'm an independent contractor here at Just Answer.

Will it at least crank?

Are you able to see what is missing, those being fuel pressure, ignition spark, and injector pulse?

Is the theft light off wit the key on?

Any more history on the vehicle that may help?

Thanks for asking your question and letting me try to help you.

You should see a rating screen if I have posted an answer, not for an info request.

Your rating is my feedback. If I don't get feedback from customers, I will not be able to continue helping customers here.

Rating me good, bad, or not rating at all does not effect the fee you have paid nor does it close the post.

Follow up/Reply as many times as needed.

Customer: replied 1 year ago.
No crank at all but if you listen close you can hear a clicking
Expert:  Chris (aka- Moose) replied 1 year ago.

Are you able to check the battery voltage?

A good battery will have 12.6 volts.

Also check the connections at the battery.

Report back on these results then we can get into more testing.