How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask peterpete190 Your Own Question
peterpete190, Auto Technician
Category: Mazda
Satisfied Customers: 27873
Experience:  Auto repair Technician with 17 years experience.Past ASE and other certifications.
Type Your Mazda Question Here...
peterpete190 is online now
A new question is answered every 9 seconds

2009 Mazda 6 with the Sanyo/Panasonic AM/FM/SAT/NAV 6CD

Customer Question

2009 Mazda 6 with the Sanyo/Panasonic AM/FM/SAT/NAV 6CD player. Is there a code or button sequence to reset the LOAD button. When Ignition is on the CD load command must be present because the front face of the device opens.
Submitted: 1 year ago.
Category: Mazda
Expert:  peterpete190 replied 1 year ago.

My name is ***** ***** I am a professional here at Just Answer. I noticed that your question had not received a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.

My info is somewhat limited on your model here but I had seen no one else has responded and would like to see if I can help here.If at any time you feel that I cannot help with this please let me know.

Most likely this is a fault with the radio/nav system itself internally electronically as a sensor inside of it may be faulty or one of the circuits is shorted or damaged internally causing this fault here.In most cases it usually needs to be removed and repaired to correct this type of fault here or removed and replaced.I have seen several radio's/nav systems act up with internal electrical faults similar like this here needing repaired or replaced.

If more help is needed, use the reply tab to continue our conversation. If no further assistance is needed, kindly rate my service.You can rate at any time and we can continue to work on your question as this will not close out your question.Keep in mind in some cases it can be difficult to fully diagnose or help repair your vehicle without seeing it and I work on delivering the best possible answer from what I see to work with.Thanks Pete.