How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask BigBob Your Own Question
BigBob, Service manager/Technician
Category: Mazda
Satisfied Customers: 4838
Experience:  25 years in the auto repair business
Type Your Mazda Question Here...
BigBob is online now
A new question is answered every 9 seconds

I remove the starter from a 1990 Mazda MPV 4WD, 6cyl automatic?

This answer was rated:

How do I remove the starter from a 1990 Mazda MPV 4WD, 6cyl automatic?

4 Wheel Drive
  1. Disconnect battery ground cable.
  2. Remove power steering belt, then the power steering pulley.
  3. Disconnect alternator connectors, then remove alternator.
  4. Remove engine undercovers.
  5. Disconnect automatic transmission cooler lines from power steering pump, then remove the power steering pump, leaving the hoses still attached.
  6. Disconnect front propeller shaft.
  7. Remove wiring harness bracket bolts.
  8. Disconnect transmission oil cooler lines from engine.
  9. Disconnect electrical connectors from starter motor.
  10. Remove fuel and brake line cover.
  11. Remove starter mounting bolts and the starter.
  12. Reverse procedure to install.

BigBob and other Mazda Specialists are ready to help you