How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles
Charles, Marine Tech
Category: Marine Electronics
Satisfied Customers: 3863
Experience:  US Navy (Ret) I have been installing Marine Electronics for over a decade now.
67216606
Type Your Marine Electronics Question Here...
Charles is online now
A new question is answered every 9 seconds

I HAVE ALOW0.0.0.0.0. SIR, I HAVE A LOWRNANC E, SIR, I HAVE

Customer Question

I HAVE ALOW0.0.0.0.0.
JA: Sometimes things that you think will be really complicated end up being easy to fix. The Marine Electronics Specialist I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so the Marine Electronics Specialist can help you best.
Customer: SIR, I HAVE A LOWRNANC E
JA: Is there anything else important you think the Marine Electronics Specialist should know?
Customer: SIR, I HAVE A LOWRANCE ROUND FACE, APPROX2.5 INCH DEPTH SOUNDER WHICH STOPPED GIVING DEPTH AND NOW SIMPLY SHOWES BLANKS. HAPPEN IF STOPPED OR MOVING! SUGGESTIONS TO FIX? THANKS...***@******.***
Submitted: 7 months ago.
Category: Marine Electronics
Expert:  Charles replied 7 months ago.

Hello, my name is***** will assist you.

Expert:  Charles replied 7 months ago.

Typically when this happens, there is either a bad depth transducer or it has simply became unplugged from the head unit. once you have inspected all the wiring, if you do not locate any issues of bad wiring, replace the transducer.

Customer: replied 7 months ago.
Thank you, ***** ***** pull the boat out of the water to check
Expert:  Charles replied 7 months ago.

The transducer may be mounted under the engine if you have an inboard in the boat.

Related Marine Electronics Questions