How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles, Marine Tech
Category: Marine Electronics
Satisfied Customers: 3975
Experience:  US Navy (Ret) I have been installing Marine Electronics for over a decade now.
Type Your Marine Electronics Question Here...
Charles is online now
A new question is answered every 9 seconds

I purchased a Hook-3x DSI a month ago and just got around to

Customer Question

I purchased a Hook-3x DSI a month ago and just got around to installing it . I don't see any specific mounting instructions and absolutely no trouble shooting guide. The depth will read 15' when I'm in 4' and it cycles through all different depths when the boat isn't moving. Any help would be greatly appreciated.
Submitted: 1 year ago.
Category: Marine Electronics
Expert:  Charles replied 1 year ago.

Hello, my name is***** will assist you.

Expert:  Charles replied 1 year ago.

Make sure that the transducer is sitting level and that the split line in it is even with the bottom of the boat. Also ensure that the power to it is not run beside any other high power devices like a trolling motor.