How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles, Marine Tech
Category: Marine Electronics
Satisfied Customers: 3852
Experience:  US Navy (Ret) I have been installing Marine Electronics for over a decade now.
Type Your Marine Electronics Question Here...
Charles is online now
A new question is answered every 9 seconds

I have a 45hp mariner that has a mechanical electric trim

Customer Question

I have a 45hp mariner that has a mechanical electric trim while towing it on the road the inside piece came out of the outside piece the motor dropped but did no damage only bent the grease seal how do assemble it and prevent this in the future
Submitted: 1 year ago.
Category: Marine Electronics
Expert:  Charles replied 1 year ago.

Hello, my name is***** will assist you.

The 45hp engine was made for quite a few years. I am not quite what inside or outside piece that you are referring to. If the engine is not supported on a transom saver attached to both the engine and the trailer while you are traveling, it can flex all sort of parts.

Can you post a pic of your set up?

Related Marine Electronics Questions