How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Marine Electronics
Satisfied Customers: 18118
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Marine Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a Raymarine E80 chart plotter on my sailboat and the

Customer Question

Hello, I have a Raymarine E80 chart plotter on my sailboat and the cog course reading on the chart plotter was differing dramatically from the course heading on the autopilot when the boat was on a straight course with no wind or tide so I did a factory reset of the chart plotter thinking this might set things right ( which it didn't) and now my AIS does not work. I understand I have to change the baud rate back from 4800 to 3800 to get my AIS back. Is this easy to do? Any thoughts on the issue related to the course having us?
Cheers, Bruce
Submitted: 1 year ago.
Category: Marine Electronics
Expert:  Pete replied 1 year ago.

Hi Bruce

Expert:  Pete replied 1 year ago.

I haven't heard back from you yet - please reply and let me know if you still need assistance with this.